Jump to content
SAU Community

New style Nismo carbon pillar garnish r33

Ty1

By Ty1,
in Exterior & Interior Styling

 Share

Recommended Posts

Ty1 Experienced

Ty1

Posted
Posted

Hey everyone, as some of you know the 'old' style nismo carbon garnish doesnt age the greatest and looked quite cheap after a while. After seeing the new nismo logo, i knew i had to have a set. I've taken a couple of pics for comparisons...even though the differences are subtle, the new logo sits up a tad higher and seems to be of a much better quality. This is on an r33 gtst20181024_161236.jpg20181024_160727.jpg

Robocop2310 Experienced

Robocop2310

Posted
Posted

Thanks for the interesting comparison mate.

Call me nuts, but I actually find the older CF pillar more tougher with the lighter less glossy finish and looks more tougher in my opinion. The logo itself is exactly the same except for the letter O. 

Cheers

  • Like 1
Ty1 Experienced

Ty1

Posted
  • Author
Posted
Thanks for the interesting comparison mate.
Call me nuts, but I actually find the older CF pillar more tougher with the lighter less glossy finish and looks more tougher in my opinion. The logo itself is exactly the same except for the letter O. 
Cheers
Your right with the older ones looking tougher. I do prefer how the older one is actually a thicker sticker. I felt ripped off when i saw how thin the new one was lol and hopefully the 'o' is less susceptible to fading compared to the older nismo logo, which was my main reason for replacing them. Now If only they re-released the 'nismo' gtr wing end caps with the new logo [emoji57]
Robocop2310 Experienced

Robocop2310

Posted
Posted
4 minutes ago, Ty1 said:

Your right with the older ones looking tougher. I do prefer how the older one is actually a thicker sticker. I felt ripped off when i saw how thin the new one was lol and hopefully the 'o' is less susceptible to fading compared to the older nismo logo, which was my main reason for replacing them. Now If only they re-released the 'nismo' gtr wing end caps with the new logo emoji57.png

Yep totally ageeed mate...but, the new one looks  much newer and clean! I have the older garnish on my R33 GTR and the bottom ends are starting to break a little but seeing it’s an older car I don’t mind it looking a little brittle. ?

you can certainly get the Nismo and caps directly from Nissan or good online stores but it only shows on one side as Nismo mirrored obviously won’t look right and having it read from left to right on the left side is a bit funny.

Ty1 Experienced

Ty1

Posted
  • Author
Posted
Hi guys, ant chance somebody could tell me how the original garnish is attached to the B pillar. Someone has tried to use a master key to break in and busted one of mine off at the top. TIA 
I've never had to remove one but to me it looks like they sort of clip in as i was able to slightly move it up and down while applying the garnish
Robocop2310 Experienced

Robocop2310

Posted
Posted

You need to unscrew a few bolts holding it against the side wall trim. There’s also a few plastic clips holding it in place. Removing the door/wall trim is done with unclipping some points with a flathead screwdriver but be gentle as it can break.

Old Rev Head Rookie

Old Rev Head

Posted
Posted
2 hours ago, Robocop2310 said:

You need to unscrew a few bolts holding it against the side wall trim. There’s also a few plastic clips holding it in place. Removing the door/wall trim is done with unclipping some points with a flathead screwdriver but be gentle as it can break.

Thanks tor the advise. 

Ty1 Experienced

Ty1

Posted
  • Author
Posted
Yep totally ageeed mate...but, the new one looks  much newer and clean! I have the older garnish on my R33 GTR and the bottom ends are starting to break a little but seeing it’s an older car I don’t mind it looking a little brittle. [emoji106]
you can certainly get the Nismo and caps directly from Nissan or good online stores but it only shows on one side as Nismo mirrored obviously won’t look right and having it read from left to right on the left side is a bit funny.
The actual nismo stick-on end caps through nissan?? Im talking about the caps with the word 'nismo' printed on them. I know you can still get the ones with gtr printed on them but i havent seen brand new nismo ones for years now [emoji22]
Robocop2310 Experienced

Robocop2310

Posted
Posted (edited)
5 hours ago, Ty1 said:

The actual nismo stick-on end caps through nissan?? Im talking about the caps with the word 'nismo' printed on them. I know you can still get the ones with gtr printed on them but i havent seen brand new nismo ones for years now emoji22.png

Hey mate sorry I mistaken the GTR ones for the Nismo ones. 

You mean these ones?

https://www.google.com.au/imgres?imgurl=https%3A%2F%2Fi.imgur.com%2Fz3aU8tL.jpg&imgrefurl=https%3A%2F%2Fimgur.com%2Fgallery%2F4M5Yy&docid=yFPgnAWXw7Lv6M&tbnid=F3JSp1gCgtOeBM&vet=1&w=480&h=360&client=safari&ved=2ahUKEwiou7nBs6beAhVigEsFHfPVCqUQMygAegQIABAw

Edited by Robocop2310
  • Like 1
Robocop2310 Experienced

Robocop2310

Posted
Posted
5 hours ago, Ty1 said:

All good man. Yep there the ones emoji5.pngemoji106.png

Hey mate, personally I don't think it you should have Nismo end caps unless you're going for the R33 Nismo 400R look with bodykit and similar wheels and the works. I have GTR end caps on and find it looks best but each to his own of course but agree hardly see them around unless it's been self fabricated.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...