Jump to content
SAU Community

Recommended Posts

Hey everyone, as some of you know the 'old' style nismo carbon garnish doesnt age the greatest and looked quite cheap after a while. After seeing the new nismo logo, i knew i had to have a set. I've taken a couple of pics for comparisons...even though the differences are subtle, the new logo sits up a tad higher and seems to be of a much better quality. This is on an r33 gtst20181024_161236.jpg20181024_160727.jpg

Thanks for the interesting comparison mate.

Call me nuts, but I actually find the older CF pillar more tougher with the lighter less glossy finish and looks more tougher in my opinion. The logo itself is exactly the same except for the letter O. 

Cheers

  • Like 1
Thanks for the interesting comparison mate.
Call me nuts, but I actually find the older CF pillar more tougher with the lighter less glossy finish and looks more tougher in my opinion. The logo itself is exactly the same except for the letter O. 
Cheers
Your right with the older ones looking tougher. I do prefer how the older one is actually a thicker sticker. I felt ripped off when i saw how thin the new one was lol and hopefully the 'o' is less susceptible to fading compared to the older nismo logo, which was my main reason for replacing them. Now If only they re-released the 'nismo' gtr wing end caps with the new logo [emoji57]
4 minutes ago, Ty1 said:

Your right with the older ones looking tougher. I do prefer how the older one is actually a thicker sticker. I felt ripped off when i saw how thin the new one was lol and hopefully the 'o' is less susceptible to fading compared to the older nismo logo, which was my main reason for replacing them. Now If only they re-released the 'nismo' gtr wing end caps with the new logo emoji57.png

Yep totally ageeed mate...but, the new one looks  much newer and clean! I have the older garnish on my R33 GTR and the bottom ends are starting to break a little but seeing it’s an older car I don’t mind it looking a little brittle. ?

you can certainly get the Nismo and caps directly from Nissan or good online stores but it only shows on one side as Nismo mirrored obviously won’t look right and having it read from left to right on the left side is a bit funny.

Hi guys, ant chance somebody could tell me how the original garnish is attached to the B pillar. Someone has tried to use a master key to break in and busted one of mine off at the top. TIA 
I've never had to remove one but to me it looks like they sort of clip in as i was able to slightly move it up and down while applying the garnish

You need to unscrew a few bolts holding it against the side wall trim. There’s also a few plastic clips holding it in place. Removing the door/wall trim is done with unclipping some points with a flathead screwdriver but be gentle as it can break.

2 hours ago, Robocop2310 said:

You need to unscrew a few bolts holding it against the side wall trim. There’s also a few plastic clips holding it in place. Removing the door/wall trim is done with unclipping some points with a flathead screwdriver but be gentle as it can break.

Thanks tor the advise. 

Yep totally ageeed mate...but, the new one looks  much newer and clean! I have the older garnish on my R33 GTR and the bottom ends are starting to break a little but seeing it’s an older car I don’t mind it looking a little brittle. [emoji106]
you can certainly get the Nismo and caps directly from Nissan or good online stores but it only shows on one side as Nismo mirrored obviously won’t look right and having it read from left to right on the left side is a bit funny.
The actual nismo stick-on end caps through nissan?? Im talking about the caps with the word 'nismo' printed on them. I know you can still get the ones with gtr printed on them but i havent seen brand new nismo ones for years now [emoji22]
5 hours ago, Ty1 said:

The actual nismo stick-on end caps through nissan?? Im talking about the caps with the word 'nismo' printed on them. I know you can still get the ones with gtr printed on them but i havent seen brand new nismo ones for years now emoji22.png

Hey mate sorry I mistaken the GTR ones for the Nismo ones. 

You mean these ones?

https://www.google.com.au/imgres?imgurl=https%3A%2F%2Fi.imgur.com%2Fz3aU8tL.jpg&imgrefurl=https%3A%2F%2Fimgur.com%2Fgallery%2F4M5Yy&docid=yFPgnAWXw7Lv6M&tbnid=F3JSp1gCgtOeBM&vet=1&w=480&h=360&client=safari&ved=2ahUKEwiou7nBs6beAhVigEsFHfPVCqUQMygAegQIABAw

Edited by Robocop2310
  • Like 1
5 hours ago, Ty1 said:

All good man. Yep there the ones emoji5.pngemoji106.png

Hey mate, personally I don't think it you should have Nismo end caps unless you're going for the R33 Nismo 400R look with bodykit and similar wheels and the works. I have GTR end caps on and find it looks best but each to his own of course but agree hardly see them around unless it's been self fabricated.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...