Jump to content
SAU Community

Recommended Posts

EFR 8374, IWG 0.92 A/R.  (slight damage to turbine wheel at edge)

6Boost T4 Divided Manifold to suit IWG.  Ceramic Coated.

Turbosmart IWG75

The lot for $2000ono.  (not looking to sell in parts at this point - it is cheap enough as is).

Guys, be aware that the reason for the cheap price is that the 8374 turbine wheel has sustained some damage.  I have provided a close up of the edge of the fins.  As you can see,  a small piece of something must have gone through it and it has taken 1 to 2mm off the outer edge (on all fins).  This was installed on an RB26/30 as per photos below.

I can say hand on heart that we did not 'know' about this damage. The car has been making the same outright power and I did not notice any lag etc.  The only reason we found it at all was that we removed the exhaust housing to get it ceramic coated and then saw it.   Believing this was a problem (and having some contacts at BW) we sourced a new one anyway and I have held onto this unit as a legitimate spare to throw on if we ever had an issue with the replacement turbo.   We never have, so its been in the cupboard for about 2years now.    We are now also going to bigger setup hence not needing this manifold and it made sense to move the lot as a kit.

For someone looking at upgrading from twins to a single and on a budget, this is good way to net you 600rwhp @1.4bar    (as this one did, even with this damage).  And then you're setup for upgrades later if you feel the need.

Parts 'missing' from it:   

  1. You will either need to block the blow-off valve if you are using externals - or source a replacement one. (edit: I might have sourced one, so will confirm).
  2. I have kept the speed sensor, so you can either fit your own or block off.  

I'm not in a big hurry to move this - its just clean up time.   I could still use it as a spare, so while I'm open to some negotiation please don't super low ball me.  Its very cheap buying as it is..

IMG_4641.jpg

IMG_4642.jpg

IMG_4636.jpg

IMG_4639.jpg

IMG_4632 (1).jpg

Closeup fins.PNG

18836706_10154734212972756_2530618631699502221_o.jpg

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/
Share on other sites

  • 2 months later...

Back up FOR SALE!

Unfortunately - sadly - I've been stuffed around by a fairly active member on here who wanted it - We had several emails and phone calls - even gave me his address to send it to.     Then put me off for a while due to some other bills. (which was fine) . 

I held it for him as he said he was still keen - but would need a month or so -  what do you know - now he doesn't return emails or PM's.  Nice.

I even went and found a replacement BOV for it for him - so the only 'missing thing' now is a speed sensor.

I wish people would just man up - if your circumstances have changed - just let me know - I'm not going to bite your head off.

 

 

Price drop to $1900 

 

  • Sad 1
Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7903932
Share on other sites

  • 3 weeks later...

@GTScotT

Yep - recent Dyno attached.  Yes we wondered about EGT at the time as well - but the general consensus was something small had gone through it. Can't be 100% sure -  Was making around 620 at wheels at the time - didn't have EGT sensors, but wasn't on the bleeding edge or anything.

Do have 6xEGTs now though!  And knocking out 684 on a hub dyno.   

(Note we are rolling on boost down low deliberately.)

Matt JW GTR.JPG

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7906727
Share on other sites

  • 9 months later...
Just now, bri73y said:

Did you end up selling the front diff gears ??

 

The 4.375?

Nope - still got front and rears (the rear includes a full GT-R diff housing, but no diff).   

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7926186
Share on other sites

  • 1 year later...

 

On 09/03/2020 at 12:21 PM, R32 TT said:

The 4.375?

Nope - still got front and rears (the rear includes a full GT-R diff housing, but no diff).   

Might be a long shot but would you happen to still have the rear 4.375 gears you mentioned above?

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7954203
Share on other sites

On 25/07/2021 at 3:40 AM, Bazil_1 said:

 

Might be a long shot but would you happen to still have the rear 4.375 gears you mentioned above?

If you’re chasing diff gears, Neat gearboxes manufactures diff gears for the R200 diff in a heap of ratios. 

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7954205
Share on other sites

  • 1 year later...
  • 3 months later...
On 27/04/2019 at 5:38 AM, R32 TT said:

Back up FOR SALE!

Unfortunately - sadly - I've been stuffed around by a fairly active member on here who wanted it - We had several emails and phone calls - even gave me his address to send it to.     Then put me off for a while due to some other bills. (which was fine) . 

I held it for him as he said he was still keen - but would need a month or so -  what do you know - now he doesn't return emails or PM's.  Nice.

I even went and found a replacement BOV for it for him - so the only 'missing thing' now is a speed sensor.

I wish people would just man up - if your circumstances have changed - just let me know - I'm not going to bite your head off.

 

 

Price drop to $1900 

 

Might be a long shot, but do you still have this? I'm interested.

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7973405
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...