Jump to content
SAU Community

Recommended Posts

Hi.

First of all, do anybody in here know if there are different deck height on the RB30 Blocks, like different models ?

Reason im asking is that I have a block here that has a 226,5mm deck height, and what other people tell me is that stock is 230.5mm

im looking for a new block, since this block keep messing things up and going out of straight.

So any info is appreciated, and let me know if someone has anything available.

Kenneth

Link to comment
https://www.sau.com.au/forums/topic/476061-rb30-block-needed-asap/
Share on other sites

7 hours ago, ktech said:

First of all, do anybody in here know if there are different deck height on the RB30 Blocks, like different models

No, they are all the same. If you have a crazy deck height, your block has been molested by a previous owner trying to fit 25 pistons to it.

6 hours ago, Rusty Nuts said:

No, they are all the same. If you have a crazy deck height, your block has been molested by a previous owner trying to fit 25 pistons to it.

Really, you think someone has machined 4mm off the Deck, thats crazy. I been wondering since day 1 why it was so short.

Anyway, yes im in Denmark and you might be right shipping gonna be alot :(

Yes I really think the deck has been machined down that far, its lucky they didn't strike water jacket. This would certainly reduce block rigidity. You probably only have a couple of mm of solid deck surface. Sorry brother.

1 hour ago, Rusty Nuts said:

Yes I really think the deck has been machined down that far, its lucky they didn't strike water jacket. This would certainly reduce block rigidity. You probably only have a couple of mm of solid deck surface. Sorry brother.

That might be the reason also why the mains keep getting out of straight. 

Its been line bored at least 2 times. Last time it cost a 94mm spool crank after only 10 miles. Just had it in the cnc machine again and its gone in the mains again. 

24 minutes ago, ktech said:

That might be the reason also why the mains keep getting out of straight

Absolutely. When I built my 30/25 I had the mains checked for line boring and my guy said not worth it the block was straight. The crank was also only linished and also checked out straight, the bores still showed the original hone marks top to bottom. The engine had travelled 150,000 km, and from talking to other builders this is not uncommon with these blocks. they were obviously very well cast and machined using excellent materials.

If you are running a 94mm crank throw what is the piston compression height and rod length. Asked a couple of mates and consensus was you can't remove 4mm from deck without hitting a cylinder parting. Apart from the proximity of the water gallery running just below the deck on exhaust side.

6 hours ago, Rusty Nuts said:

If you are running a 94mm crank throw what is the piston compression height and rod length. Asked a couple of mates and consensus was you can't remove 4mm from deck without hitting a cylinder parting. Apart from the proximity of the water gallery running just below the deck on exhaust side.

I had custum piston made to fit the spool crank and rods, so i didnt notice from the beginning that the block was actually 4mm to short. I did wonder why Jeremy at JE piston told me that stock Deck height was 230.5mm. I was sure that there had to be different kind of blocks, since i could not imagine anyone that stupid to remove 4mm from a Block.

Anyway, i need a new one and i will need to order new pistons to fit the new block, and this time hope that it will stay straight. 

In case Griffin dont want to sell the one he has, do you know where to look up those kinda blocks ?

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am probably calling this too early but I think I found what part of my problem is. I have a couple of dents that are fairly close to each other and I tried to fix them individually. Recently I put one larger coat across all the dents and sanded it and for the first time ever it's all even except for the edge where the bare metal is, I just need to put some putty there. I'm ordering some better longer blocks that are more flexible. Other good news is that the other repairs on my panel are flat even with the guidecoat. It's these 2 dents which are an absolute c*nt l lol.
    • Murray will have better input, but I'd be going with less filler, and aimed at the low spots mainly, and hence won't need as much sanding, which then means get the guide coat on earlier. That's how I'd do it, BUT, I'm not a pro, I'm a DIY hack who will then get the shits halfway through, and have one spot awesomely repaired, and the other spots look like a 3 year old was left unsupervised with workshop tools...
    • Where is the most common place to locate it? Disappointing that Garrett won’t make a fitting for it since they know everyone will use it
    • A HICAS fault really should not cause the engine to go into limp mode. These cars are so old that the systems barely talk to one another. The thump might be the lockoff solenoid valve for the HICAS (the safety valve) getting closed, to lock the rear wheels "straight". I say "straight", because when my HICAS used to shit itself before I took off and nuked it from orbit, it would lock up with the rear wheels wildy non-straight and you'd need 45° of steering wheel to drive straight. Take off and nuke it from orbit. First step is to pull the smaller of the two plugs out of the HICAS CU. See if it stops misbehaving. You can also (whilst leaving it plugged in) try to get the HICAS CU into diagnostic mode by doing the pedal dance, or by connecting a CONSULT capable diagnostic reader into the car and seeing what it has to say for itself. Can't do either of these with it unplugged though. 1st gen HICAS is a ballache. I would do a complete delete. I did do a complete delete.
×
×
  • Create New...