HELP REQUIRED

[Shir]

Pulling apart an rb25det and the 3 head studs in the middle are in there f**king good the rest were easy to get out,  I’ve managed to round the hex bit on one so it’s f**ked, tried welding a nut on but it’s too hard to work in the small space, tried putting in larger bits nothing’s worked. Is there any suggestions you guys have?

Edited February 16, 2019 by Shir

[GTSBoy]

What studs...

[Shir]

The 3 studs located in the spark plug valley

[Ben C34]

17 minutes ago, Shir said:

Pulling apart an rb25det and the 3 head studs in the middle are in there f**king good the rest were easy to get out,  I’ve managed to round the hex bit on one so it’s f**ked, tried welding a nut on but it’s too hard to work in the small space, tried putting in larger bits nothing’s worked. Is there any suggestions you guys have?

They do not need to be removed. No engine ever has a bolt right in the middle of 2 cylinders in the thinnest part ,, that would be mental.

they are plugs.

you have missed the stupid little bolts hidden by the inlet manifold in the corners

[Shir]

[Shir]

Okay cheers mate, first Rb I’ve done still learning what’s. what

[Ben C34]

That would go into the cylinder if it was an actual bolt holding the head on. Which wouldn't work.

Stop trying to undo it!