Jump to content
SAU Community

Recommended Posts

Hi guys.

I’m sorry to those who have those flaps of rubber that come off the bonnet.

This is the exact reason that you are having trouble making the guides fit.

I do not have those on my car, and it looks like they never have been there.

They are in the same place that I put the foam to stop the bonnet rubbing on the panel.

If you remove the rubber flaps, they should fit without a problem.

Again, I’m sorry but it looks like you will need to remove the rubber flaps to make the guide fit.

BASS OUT

  • Replies 175
  • Created
  • Last Reply

Top Posters In This Topic

Okay guys.

Good news. I just picked up the guide blanks from my subbie.

They are getting bent as we speak.

I will bring the appropriate amount to the Meeting tonight if anyone wants to pick them up then.

Other people, I will send them off tomorrow arvo.

Cheers

BASS OUT

GroundRun.

I'll be at the Skyline Club meeting at the pub in Hawthorn tonight from 8pm onwards, otherwise you can give me a call and pick it up between 5:30 and 7:30 from my work.

Call me, 0419 101 639

y.

Interstate people.... Your guides are all boxed up and awaiting the truck.

Afro, Erik and Coxy, you should see your guides in day or two.

Coxy, please sort out the payment, you have all the details.

Melbourne people, NismoR34, GroundRun and CNBLOW let me know when you can come and pick them up.

I'm in Mitcham or Doncaster.......

Come and git em.

BASS OUT

PS. Don't forget my trader rating and VOTE FOR MY CAR ON AUSSIEWHEELS!

NismoR34, CNBLOW

I'll be at home all this weekend, apart from the obligatory grandfinal BBQ at my sisters house.

I will bring the guides home with me, so if you give me a call, we can meet up.

0419 101 639

Tonight is good, and Sunday is also good.

Just give me a bell, and we'll organise something.

CHEERS

BASS OUT

Ground Run???

When you gonna call??

I'm bringing the guides home with me this weekend so give me a bell.

Also, could the people with standard bars take a couple of photos please??

Just want to have them on record so I know that they were right.

Cheers

BASS OUT.

ALSO< check out the new project.... AFM to Turbo Ducts.

Well done... now go and clean your engine bay, it's filthy... shame on you!

I fitted mine on too... I left you feedback Peter :( I'll take some pics later today.

:D

Well done... now go and clean your engine bay, it's filthy... shame on you!

I fitted mine on too... I left you feedback Peter :( I'll take some pics later today.

:D

:Oops: I working on that now!!!! hehe itll be clean soon

Thanks Matt.

I'm glad the bars all fit very well.

Like I said Matt, "Trust me, If I'm making it, it will be right."

BASS OUT

Well there was some sunshine this afternoon so I went out and took some nice shots of my car.. here's a shot of my shiny new air guide:

In the words of the Irish guys in the Guinness TV commercial, Brilliant~! :D

airguide1.jpg

i have to modify mine alot (c-west front bar),

i started modifying the front bar,, but than decided to hack up the guide,,

so didn't do to much damage to the bar, will show in pics later,,

i'll have to remove the whole front lip of the guide, coz my front grill/mesh wont fit, the front lip of the guide sticks out too far,, once again will post pics later on,,

will update the changes soon,,,

thanks

Afro

Hey Bass..thanks for the guide...i went to put it on but it wouldnt fit past the bonnet unhook latch...i noticed on the guide a marking where it was hitting where i assume it was supposed to be cut but wasnt cut...after follwing the line with a hacksaw blade, i cut out a little section and then it was spot on...dont know if anyone else had the same problem with the standard bar...nevermind it fts now and looks good....

thanks.......oh and i hope u sorted out the cabbie :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...