Jump to content
SAU Community

Recommended Posts

Well I have come across a great deal for all the R33 25t, R32 gtst people out there.

What we have is a pod and cold air box all in one kit. this kit is great cause it requires you to only remove the airbox and undo anything else (pain it the butt) it uses 2 factory bolt holes and the guard to hold its self in place. (see pics)

The box/panel is made out of ABS which is the same stuff your standard air box is made out of so its great for keeping out the hot stuff.

there is no modify your existing engine bay or anything else for that matter.

3 easy steps.

1./ remove your cold airbox etc...

2./ bolt up the adaptor plate and pod.

3./ fit cold air panel/box

simple... yeah well we thought so.

ok dollars simple. email me you details at [email protected] and once I have 10 people confirmed (via payment) we can all buy the for a simple $230 in GST + freight.

pod1.jpg

pod2.jpg

pod3.jpg

if you have any questions please email me.

Cheers

Scotty

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

Just a question, where you getting the air from?

it get the cold air from the front (comes in from behind the headlight ) it basicly blocks the heat from the side and the top which is where most of the heat comes from.

from under the pod.

what kinda pod is it? How would it compare to say an A'PEXi one?

Can you get some larger pics aswell please?

Its a unifilter, they compare very well, plus they are reusable too.

Wash and re-oil etc.. email me for the pics.

INASNT, these unifilter pods are a universal item that have been fitted to a range of high performance cars including skylines without issues.

The partitions are a new design, but are running without any issues (thats my purty blue skyline in the pics). What sort of testing do you mean?

Can you separate the kit?  If yes, what is the cost just for the cold air box?

I am already using a Unifilter Pod and am looking for a cold air box.

Duncan...as above. Will you separate the kit? If yes, what is the cost just for the cold air box?

Hi Swiyo, sorry that we haven't replied yet, we are just checking out with the supplier for a price, I'm sure we can help out.

Have you been running the pod long?

INASNT, these unifilter pods are a universal item that have been fitted to a range of high performance cars including skylines without issues.

The partitions are a new design, but are running without any issues (thats my purty blue skyline in the pics).  What sort of testing do you mean?

From minor testing guys at ice have done on pod in sealed boxes shows that when you encase a pod in a box the natural intake of air a pod has (all directions) sometimes effect the way fersh air enters it when inside a box. Same as with panel filters are ok in a box as they only suck in air from one directions.

  • 2 weeks later...
  • 4 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...