Jump to content
SAU Community

Recommended Posts

I'm looking to buy this wagon and wondering if the community can help with some questions.

1. Anything to look out for during a pre-sale inspection?

2. Looking at the parts list thread, am I correct in saying parts for general/regular maintenance (change oil/brake pads) are easy to get hold off?

3. What are weak parts of these cars if any?

4. Fuel mileage for someone who doesn't have a heavy foot?

5. Is the boot as big as a commodore wagon?

Thank you in advance!

Edited by mrjayviper
Link to comment
https://www.sau.com.au/forums/topic/477815-looking-to-buy-a-stagea/
Share on other sites

I'm looking to buy this wagon and wondering if the community can help with some questions.
1. Anything to look out for during a pre-sale inspection?
2. Looking at the parts list thread, am I correct in saying parts for general/regular maintenance (change oil/brake pads) are easy to get hold off?
3. What are weak parts of these cars if any?
4. Fuel mileage for someone who doesn't have a heavy foot?
5. Is the boot as big as a commodore wagon?
Thank you in advance!

1-Check for rust under the mirrors
2-Parts are easy to get
3-Stagea brakes are a let down but most have a 4 spot Nissan upgrade
4-fuel mileage isn’t that bad I average 400-450 per tank
5-much bigger than a commodore wagon. ( and cooler )
  • Thanks 1
1 hour ago, mrjayviper said:

I'm looking to buy this wagon and wondering if the community can help with some questions.

1. Anything to look out for during a pre-sale inspection?

2. Looking at the parts list thread, am I correct in saying parts for general/regular maintenance (change oil/brake pads) are easy to get hold off?

3. What are weak parts of these cars if any?

4. Fuel mileage for someone who doesn't have a heavy foot?

5. Is the boot as big as a commodore wagon?

Thank you in advance!

When you say "this" wagon was there supposed to be a photo or a link? If not what model are you interested in?

1 hour ago, RBW49N said:


1-Check for rust under the mirrors
2-Parts are easy to get
3-Stagea brakes are a let down but most have a 4 spot Nissan upgrade
4-fuel mileage isn’t that bad I average 400-450 per tank
5-much bigger than a commodore wagon. ( and cooler )

The rear view side mirrors? Any reason for the rest there? Thanks

Edited by mrjayviper

I most I have Put in was 58 litres
And the watergate refs on foam order the mirror and they rust there it’s pretty common

And the water gets on foam under the mirror and they start to rust there it’s pretty common.

I should read what I type before posting
  • Like 1
44 minutes ago, RBW49N said:


And the water gets on foam under the mirror and they start to rust there it’s pretty common.

I should read what I type before posting

another questions please. You mentioned the brakes are a letdown. are you saying it's better to change the calipers to the 4 piston caliper? Thanks again!

There is a huge difference between the C34 and M35 Stageas - chalk and cheese.

Read the thread above this one helpfully titled "Buyer's Guide -the C34 Stagea" and then a bit further up

"Summary of the M35 info Uber Thread"

There is a huge difference between the C34 and M35 Stageas - chalk and cheese.
Read the thread above this one helpfully titled "Buyer's Guide -the C34 Stagea" and then a bit further up
"Summary of the M35 info Uber Thread"

I just thought he would be looking at the best ones. C34
  • Haha 1
33 minutes ago, KiwiRS4T said:

This was my 3rd C34

Stagea 2014 M35 Wheels.jpg

Love it :) (both the colour, and that it was your third :) )

They also came in a very light green and a two tone light green....but that is the green I meant.

And I know I sound indecisive, but I also love that series 2 yellow. It is so understated for a family car, kind of gives away the stagea secret....

  • Like 1
Love it [emoji4] (both the colour, and that it was your third [emoji4] )
They also came in a very light green and a two tone light green....but that is the green I meant.
And I know I sound indecisive, but I also love that series 2 yellow. It is so understated for a family car, kind of gives away the stagea secret....

Yellow is the best. My wife thinks not but I like it ?
  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...