Jump to content
SAU Community

Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

lol i feel like a cruise now that exams are over... anyone wanna organise something? Altho I do leave on friday morning to syd so youse betta make it quik. Unless you guys wanna cruise with me to syd :P

Originally posted by Bo0sT_JuNkY

im from keilor and me and my mate r always at taylors macca's.

a white and a black R33 .And a s14 200.Im in for a cruise should meet at taylors macca's coz at leats then we can pick up bitch's

man u r setting a bad image of us skyline drivers if u always hang at the local maccas.

Save that for the high school kids and the ricers!

Originally posted by Bo0sT_JuNkY

Well u when u live across the road from one its a bit hard!anyway im not there all the time  i just go post and see who's there .And as for stalking 17yr chicks well it's very rare if chicks that young are there and if they are there well im only 18!Anyway !

R roots a Root if there 17 or 23 .lmao:uh-huh:

well i live about 5 mins from a 24hr maccas, and when i drive past in the night there is always sum boy racers there!

As for 17year old chicks being at maccas! u would b lucky if they were 14 years old that hang around there!

Well some of us r meetin up at Knox City tomz 14/11 at 8:30 the multi level car park near cue sports the second level just a mini meet for a bit of chat nuffin else if u got nothin else to do come down, i'll be in the Silver R33

Whistla and Mz`Nismo good to c u guys on here lol, all we need now is Anth although he did sell his yesterday, poor guy !

pfffffffffft i drive to essendon from DINGLEY!

we can have one on the eastsieeed and one on the west sieeeed and the best from both sieeeeds can meet up in da middle for a battle royal of the sieeds!

haha... i live about 5mins away from there... i go there sometimes to buy a cheeseburger and small fries :( but i dont make it a habit as theres usually cops there...

Originally posted by Bo0sT_JuNkY

Well u when u live across the road from one its a bit hard!anyway im not there all the time  i just go post and see who's there .And as for stalking 17yr chicks well it's very rare if chicks that young are there and if they are there well im only 18!Anyway !

R roots a Root if there 17 or 23 .lmao:uh-huh:

Originally posted by Bo0sT_JuNkY

Well u when u live across the road from one its a bit hard!anyway im not there all the time  i just go post and see who's there .And as for stalking 17yr chicks well it's very rare if chicks that young are there and if they are there well im only 18!Anyway !

R roots a Root if there 17 or 23 .lmao:uh-huh:

they would have to be some sad ass hos to be hanging around a maccas picking up guys HAHA

oh well... wear a conny theyre probably as liberal with everyone else that drives thru there.

Originally posted by meggala

hey boost junky what color is your car I also live in the west east keilor way the black r32 with different wheels.

as for a meet why not the place in parkville it got plenty of room and no cop hassles.

meggala

yep i like that place its not to far :(

meggala,

Does your r32 have white wheels?or is it the one with the big tommy kaira graphics on the side?My 33 is blk series 1 4wd drive height as i cant lower it cause i have 17x9 racing sparco's off a gtr and they stick out the wheel arch!Looks preety stock except for the huge fmic.No body kit.My friends 33 is white with a gtr spoiler with some silver 7 spoke wheel's.With hks exhaust.Parkville?ive seen the sign just cant think of where?

g'borough is around me n dox... we can go over to dox's house n steal his RB25DET if you want... I'll take the header if you take the bottom. muhahahaha... oh wait he can see this huh? k every1 scroll up... nuffin 2 see here.

INASNT hangs at the dandenong plaza car park.. he tries to see how loud his exhaust can sound.. and how fast it takes him to do a lap around the carpark..

u can see him there usually after working hours.. friday being the best night cause thats when all the teeny bopper school girls are on the loose

ok im gonna get killed for this..;)

Originally posted by MZNISMO

INASNT hangs at the dandenong plaza car park.. he tries to see how loud his exhaust can sound.. and how fast it takes him to do a lap around the carpark..

u can see him there usually after working hours.. friday being the best night cause thats when all the teeny bopper school girls are on the loose  

ok im gonna get killed for this..;)

AMBZ for you general info i havent been to dane plaza for agesss and as for laps around the carpark, my car struggles to get over the speed humps there, so if i was to do any laps it would be a slow one.:(

*cough* if you wanna see MZNISMO's car go down to chapel street on friday and sat nights, shes known to be seen there quite often*cough* :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...