Jump to content
SAU Community

Recommended Posts

R32GTR Seats and Genuine Nismo Seat Covers

Hi all,

I have my R32GTR seats up for sale. Hard to know what condition to describe them as, everyone's opinion is different, but I'd say very good condition for the drivers seats and whatever better than VGC is for the passenger seat. 

Drivers seat has the usual small tear and a small mark near the front centre (which looks like it'd come out easily). Can't see any marks on the passenger seat at all. But what you see in the pics is what you get (happy to provide additional pics if needed). If someone buys the seats on their own, they won't come with the centre trim in the head rest (you can see what I mean in the pics) because they've been re-trimmed to match the Nismo covers and they need to go with the Nismo covers. However, if someone ends up buying the covers separately and has the trim piece on their own R32 seats, then I'll ask for that as part of the sale and send it on to you when I get it. It's not ideal, but it's the best solution I can think of. Will also hang on to the seat belt clips as I need them for the new seats, but that's pretty standard.

I also have genuine Nismo seat covers (front and rear) which look amazing and are in as new condition (have only been on for a few thousand km's). They're of the fit and quality you'd expect from Nismo i.e. exceptional. 

I'd prefer to sell them together (seats and covers) for $1,800 but if you only want one or the other then the seats are $1,000 and the covers are $800.

No idea about shipping costs, so buyers will need to look into and organise this for themselves. Collection will be from 2603 in Canberra. 

Let me know if you have any other questions. 

Andrew.

 

1.JPG

2.JPG

3.JPG

5.jpg

Nismo Fronts.jpg

Nismo Rear.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/478221-r32-gtr-parts-oem-and-aftermarket/
Share on other sites

  • 11 months later...
  • 1 month later...
  • 1 year later...
On 30/06/2018 at 12:52 PM, mick-r34gtt- said:

Hi bro, just seeing if the seats are still available and if so would you sell just drivers side? Cheers bro

Hey Mick. Yes, still available, but not willing to sell separately.

Hey all,

Have a bunch of aftermarket parts from my 32GTR, in preparation for its respray:

Full 3.5inch turbo back exhaust. Not sure of brand, but great note and I think the section from cat to extractors is titanium (not 100% sure, though): $500

HKS fully adjustable coil overs (pics coming soon, just need to give them a clean): $750

2 x Garrett ball bearing 2860-5’s in near new condition (only a few thousand km’s): $900 each.

Complete R32GTR Brakes (non-brembo), including slotted rotors (DBA, apparently): $500 per pair

Koyorad Radiator: $400 (retails for $690) and only a few thousand km’s old.

ABS Module and mount: $300

Also have a bunch of other parts, so if you’re after something specific, let me know and I’ll see if I have it.

Welcome to view anytime. Parts located in Red Hill, ACT. Prefer pickup but can post at buyers expense.

Exhaust 2.jpeg

Exhaust 3.jpeg

Exhaust.jpeg

ABS 2.jpeg

ABS 3.jpeg

ABS.jpeg

Brakes 2.jpeg

Brakes.jpeg

Rotors.jpeg

1.JPG

2.JPG

3.JPG

4.jpg

5.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...