Jump to content
SAU Community

Recommended Posts

Hey, I have a 94 r33 gtst manual skyline. My brother has just bought a VN ss. ive raced him and kicked his ass, but only when we were rolling at 20kmph. his is an auto its got the usuall mods like exhaust and extractors. So how do i take off so that i kick his ass, i know that if i get a good start, all he will see is my nice big round tail lights, but if i stuff up than ill have to chase him down, which i know isnt a problem i just wanna smoke him at the lights, cos hes a commonhore lover and skyline hater. Can anyone help? do i just drop the clutch at say 2200 rpm, or is there some other way. Please help? I was practising tonight, and al i got was alot of wheel spin, i got like 2 good take offs from like 8. What are some tips that can help me take off without bogging down or lighting up the tyres, cos my brother has been running round sayin that he can beat me, only cos i bogged down once and didnt bother to chase him. PLEASE GUYS HELP i wanna show this tree huggin commonhore lover of a brother that skylines are the bomb, and that his crappy VN SS AUTO is a BOMB. :wassup: :rofl:

Link to comment
https://www.sau.com.au/forums/topic/48032-how-to-launch/
Share on other sites

Guest two.06l
Hey, I have a 94 r33 gtst manual skyline. My brother has just bought a VN ss. ive raced him and kicked his ass, but only when we were rolling at 20kmph. his is an auto its got the usuall mods like exhaust and extractors. So how do i take off so that i kick his ass, i know that if i get a good start, all he will see is my nice big round tail lights, but if i stuff up than ill have to chase him down, which i know isnt a problem i just wanna smoke him at the lights, cos hes a commonhore lover and skyline hater. Can anyone help? do i just drop the clutch at say 2200 rpm, or is there some other way. Please help?  I was practising tonight, and al i got was alot of wheel spin, i got like 2 good take offs from like 8.  What are some tips that can help me take off without bogging down or lighting up the tyres, cos my brother has been running round sayin that he can beat me, only cos i bogged down once and didnt bother to chase him.  PLEASE GUYS HELP i wanna show this tree huggin commonhore lover of a brother that skylines are the bomb, and that his crappy VN SS AUTO is a BOMB. :wassup: :rofl:

i hope this racing was done on a private road or at willobank as street racing is not condoned on this site

Link to comment
https://www.sau.com.au/forums/topic/48032-how-to-launch/#findComment-967840
Share on other sites

practice practice practice.

buy new clutch.

practice practice practice... and so on and so forth.

Ideally you want the hardest rev you can drop without wheelspin.. add about 200rpm and adjust clutching accordingly.. (basically what was said above cept another way of thinkigna bout it).

Then just practice as you go along.

Link to comment
https://www.sau.com.au/forums/topic/48032-how-to-launch/#findComment-969635
Share on other sites

1 = Start from behind, never alongside

2 = Hold it against the handbrake

3 = Take up the clutch till it bites a little

4 = Idle up to 2,000 rpm

5 = Roll off the clutch slowly and add accelerator at the same time

6 = Minimal wheelspin by throtttle control

7 = Close up to the rear in first

8 = Change into second at 7,000 rpm

9 = Pull out and go past

10 = Make sure to sound horn and wave bye bye as you speed past :wassup:

The object is maximum embarrasment, do it once, laugh about it afterwards and he won't race you again. Offer to do it once more if the fool persists, but tell him you will give him a bigger head start this time as he needs all the help he can get. :)

Link to comment
https://www.sau.com.au/forums/topic/48032-how-to-launch/#findComment-971507
Share on other sites

I launch at 4200rpm.. But its an RB20DET lol.. :)

Slipping the clutch is the key.

You probably have tyres that are shot by the sounds of it. Either that or you diff is open wheeling.

I've loaded up against the handbrake a few times.

It works well and gives you a clean launch but by the time I click second I always get clutch slip..

Thats my crappy 2.5yr old clutch though. :)

Link to comment
https://www.sau.com.au/forums/topic/48032-how-to-launch/#findComment-972064
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is anyone running these axles? R32, R33, R34 GTR front Axles. shafts itself rated 950hp. Suit all RB26 engines Croydon, Melbourne, Victoria Would be nice to pay half the cost of Driveshaft Shop Axles. I'm building an AWD S13 Coupe that is very low ride height (high cv angle) compared to stock R32. Has an RB30 with appx 600whp. Just looking for feedback. Thanks, Josh- https://www.instagram.com/feng_shui_garage/
    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
×
×
  • Create New...