Jump to content
SAU Community

Recommended Posts

Surely there is little to no difference to other Nissan caps from the same era? J31 Maxima with the same sort of engine, for example. In which case, the Tridon catalogue points you to a rad cap number of CB1390. So you walk up to the Tridon rack at Supercheap/wherever with your V36 rad cap in hand and see if it looks the same, has the same rating. if it does, you buy it. If it doesn't, you look at the other options that you will have pre-planned by skuzzing through the Tridon catalogue to look for other Nissan models from the same period that might be similar.

I mean, it's not as if rad caps are a high technology model specific thing.

Link to comment
https://www.sau.com.au/forums/topic/480518-radiator-cap/#findComment-7932139
Share on other sites

3 hours ago, GTSBoy said:

Surely there is little to no difference to other Nissan caps from the same era? J31 Maxima with the same sort of engine, for example. In which case, the Tridon catalogue points you to a rad cap number of CB1390. So you walk up to the Tridon rack at Supercheap/wherever with your V36 rad cap in hand and see if it looks the same, has the same rating. if it does, you buy it. If it doesn't, you look at the other options that you will have pre-planned by skuzzing through the Tridon catalogue to look for other Nissan models from the same period that might be similar.

I mean, it's not as if rad caps are a high technology model specific thing.

i did go supercheap but thier  nearest was only 90kpa    ive since tracked a 130kpa  so would you recon near enough?   cheers

 

Link to comment
https://www.sau.com.au/forums/topic/480518-radiator-cap/#findComment-7932149
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...