Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

wtf is an ork van :confused:

:P

The Bride rails bolt straight into a R32-R34 skyline. From there, the OBX seats bolt onto the top of the rails. The rails have 4 holes, but depending on which OBX seat you choose you may have to drill 2 holes in the rail. They are $295ea from Powerplay.

A cheaper option may be to start with generic style rails from somwhere like race and rally, but if you go that way you will need someone to help you mount the rails to the car. Mounting the seat to the generic rails is the same, 2 holes are OK, 2 you may need to drill.

Hope that helps :D, its pretty sad when the rails cost more than the seats ;) They are still a pretty good deal compared to the $1k + people ask for used Bride seats.....

yeah, thanks Nissan for creating the world's most uneven floorplan....you will definately need at least some custom fabrication if you go generic rails, both for the uneven floor and for the seat belt mount on the drivers side.

The Bride rails or a copy are the easiest option :(

yeah Powerplay have them in stock at $295 which I got the impression was pretty cheap. Its a shame you can't get them made up cheaper :)

  • 3 months later...

well....that very much depends on which ones you go for....

If you take a deep fixed bucket one like the Forza, they are a real pain in the arse to live with....don't buy something like these for a daily driver unless you really know you want them. On the other hand they are superb at holding you in place :P

On the other hand the reclining ones are more open and wider. So, they don't hold you as tightly but they are much easier to live with :D

  • 5 months later...

just measured my hips from point to point with a ruler here at work. about 55 centimetres. man i need a wide seat. duncan when are we gonna meet up next? i gotta try out your seat.

cheers, MARK

just measured my hips from point to point with a ruler here at work. about 55 centimetres. man i need a wide seat. duncan when are we gonna meet up next? i gotta try out your seat.

cheers, MARK

Hey Duncan, is Mark saying you got a fat arse mate?.....LOL

Ian

haha he is probably right to...for me I looked at the regular/narrow seats and just laughed :P

Anyway, Mark come out to the UAS day I will have the race car there, I have the forzas in it which are the same width.

midnight, unfortunately I can't get further photos than what are on the site....we don't carry any stock to take pics of, thats how we can do them so cheap :D The Forza in blue/black are mostly blue with black highlights (like the yellow/black on the pics).

I did come across some OBX seats at Autobarn, so you might find them there.....just don't pay their prices ;)

Hey negative.....rails are the biggest problem with aftermarket seats :P

The easiest way I've found is getting a set of the Bride rails, they bolt straight in and the OBX seats bolt straight to them.

  • 2 weeks later...

Hey mate the seat you tried was a Forza, which is the same width (410mm) as the daytona wide. Unfortunately that is as big as they make the fixed back seats.

If it was too tight there are always the recliners, they still have pretty good support but are roomier for the ample gentleman :D

OBX are great seats, these are awesome value, i have two black monaco seats in my 4dr 32 and they are great for all day driving and track use, and best of all they are on the standard r32 rails and are comfortable for the everyday driving. Good luck with the group buy.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...