Jump to content
SAU Community

rb25det with 26 internals first start mapping

tidi0x

By tidi0x,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

tidi0x Apprentice

tidi0x

Posted
Posted

I am currently building my S2 25det from my R33 with a 26 crank, nitto I beams, and 26 CP pistons. 

I have a G4x PNP which I intend on using with a brand new loom from wiring specialties with r35 coils. However when it comes time to do first start since pulled the car down from bone stock I want to drop the built engine in the car as stock for first start because I know those parts WORK and I do not have to diagnose anything with new ecu, loom, turbo, intake etc.... 

I have no issue running the G4x on first start, but I do not know which base map to use be it the 25 or the 26 map, so my second option (And somewhat preferred) is the stock ecu, but I am concerned because the stroke is longer technically the ignition would be slightly retarted and I do not want to risk knock or detonation; Obviously I do not intend to beat on it, but I want to put light driving load accel and decel on the car to set the rings. After first start and drive, I will tear it down and run my turbo, intake mani, G4X and take it to my tuner to get the tune.  

Am I safe to run stock ecu for first run and drive?

Also can someone please validate that for a 25 with 26 internals I need to run 26 Main bearings.... I have found two threads that talk about it with no SOLID answer. 

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

use the 25 base map if a plugin as the inputs/outputs will be different but should always confirm all settings before first start. The Link ignition base map is fine for first start.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...