Jump to content
SAU Community

Recommended Posts

Hey guys,

Although i am in the UK, hoping you guysc an help me out with identifying some OEM shock absorbers i can get for my R34 GTT.
I tried looking at the KYB & Monroe website for OEM parts (i got a standard R34 GTT) , but nothing shows up  :(

I cant imagine the the GTT has specific shock absorbers that no other car uses  (I wonder, given the rear brake rotors on the GTT are the same as the Z32  300zx/Fairlady , wonder if the shocks are ?? )
Trying to either find the Nissan OEM number, or the KYB part number for the shocks, or any standard OEM spec shocks i can use ?

Any ideas ?
:)

Link to comment
https://www.sau.com.au/forums/topic/481834-r34-gtt-oem-shock-absorbers/
Share on other sites

Do you want to be cheap? Or do you want to buy decent dampers? Because Bilstein B6 is the minimum that I would recommend for direct fit dampers.

Nothwithstanding that, I just typed "r34 kyb rear" into google and the first 2 hits were for an eBay listing and the actual web shop of this crowd here in Oz offering this https://www.superspares.com.au/2-rear-kyb-new-sr-special-shock-absorbers-for-niss~12193763

 

cheers for reply, not looking for cheap, just oem (standard car).....
I found the original part numbers last night, and the SR range of KYB for the R34 GTT  (same as your link)..

The idea was to buy OEM shocks, and add my Tein S springs to the shocks (already bought the springs before my pal told me i got x2 leaky shocks) .....
Being in the UK, coilovers are easier to obtain that shocks!

Selected Vehicle:
NISSAN SKYLINE R34 ER34 05/1998~05/2001 2 Door Coupe 2.5 litre, RB25DET I6 24v DOHC Turbo MPFI {208KW} RWD,AT/MT,[JAPAN] 12272
 
Shock/Strut - Front
image.gif.6280203887490948211e6610e1fa5d02.gifA12C6E050DA21BF458277473440D1DAE3F0A1B0612CB7F983FAB3430EFF3C0AB.jpg NSF9092

New SR Special - Enhanced Performance

2 req

Shock/Strut - Rear
image.gif.7913e75b64ab70f76943c3d75e0ccdae.gifB17930682718FF60403DBE2831C80BA316E2DA175F775161D39B804AA5C6ACA9.jpg NSF9093
Suits Lower Eyering Mount Type
New SR Special - Enhanced Performance

2 req

image.gif.9e6349fdf5e9c0b867aa5df3a3bdfc38.gifB9231E6738C028BA6761DCDFCCD05568A349DBB80C78E24729E4E8E81FFBC2D3.jpg NSF9095
Suits Lower U-bracket Mount Type
New SR Special - Enhanced Performance

2 req

Those Bilsteins above are for the GT with eyelet bottom. The GTT has fork bottom, like the GTR. But you can get B6s and B8s for GTRs, so I can't see that there would be too much trouble getting one for the GTT. I mean, superficially, you could just put the GTR one in. It will fit.

cheers guys
Turns out, i need to send my springs back to the supplier, and get coilovers instead...
And yes,I was looking at OEM (nissan), or a manufacturer that made OEM spec shocks for the car..
As said, mine is standard, but at the same time, was trying to keep my costs less when buying shock absorbers, compared with buying Coilovers....

The B6 & KYB SR shocks, even the Nissan OEM shocks = cost more than Tein Street Advance Coilovers.....
So end result is, i need to switch anyway....
Cheers for the replies though guys :)

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...