Jump to content
SAU Community

Recommended Posts

Hey guys,

Although i am in the UK, hoping you guysc an help me out with identifying some OEM shock absorbers i can get for my R34 GTT.
I tried looking at the KYB & Monroe website for OEM parts (i got a standard R34 GTT) , but nothing shows up  :(

I cant imagine the the GTT has specific shock absorbers that no other car uses  (I wonder, given the rear brake rotors on the GTT are the same as the Z32  300zx/Fairlady , wonder if the shocks are ?? )
Trying to either find the Nissan OEM number, or the KYB part number for the shocks, or any standard OEM spec shocks i can use ?

Any ideas ?
:)

Link to comment
https://www.sau.com.au/forums/topic/481834-r34-gtt-oem-shock-absorbers/
Share on other sites

Do you want to be cheap? Or do you want to buy decent dampers? Because Bilstein B6 is the minimum that I would recommend for direct fit dampers.

Nothwithstanding that, I just typed "r34 kyb rear" into google and the first 2 hits were for an eBay listing and the actual web shop of this crowd here in Oz offering this https://www.superspares.com.au/2-rear-kyb-new-sr-special-shock-absorbers-for-niss~12193763

 

cheers for reply, not looking for cheap, just oem (standard car).....
I found the original part numbers last night, and the SR range of KYB for the R34 GTT  (same as your link)..

The idea was to buy OEM shocks, and add my Tein S springs to the shocks (already bought the springs before my pal told me i got x2 leaky shocks) .....
Being in the UK, coilovers are easier to obtain that shocks!

Selected Vehicle:
NISSAN SKYLINE R34 ER34 05/1998~05/2001 2 Door Coupe 2.5 litre, RB25DET I6 24v DOHC Turbo MPFI {208KW} RWD,AT/MT,[JAPAN] 12272
 
Shock/Strut - Front
image.gif.6280203887490948211e6610e1fa5d02.gifA12C6E050DA21BF458277473440D1DAE3F0A1B0612CB7F983FAB3430EFF3C0AB.jpg NSF9092

New SR Special - Enhanced Performance

2 req

Shock/Strut - Rear
image.gif.7913e75b64ab70f76943c3d75e0ccdae.gifB17930682718FF60403DBE2831C80BA316E2DA175F775161D39B804AA5C6ACA9.jpg NSF9093
Suits Lower Eyering Mount Type
New SR Special - Enhanced Performance

2 req

image.gif.9e6349fdf5e9c0b867aa5df3a3bdfc38.gifB9231E6738C028BA6761DCDFCCD05568A349DBB80C78E24729E4E8E81FFBC2D3.jpg NSF9095
Suits Lower U-bracket Mount Type
New SR Special - Enhanced Performance

2 req

Those Bilsteins above are for the GT with eyelet bottom. The GTT has fork bottom, like the GTR. But you can get B6s and B8s for GTRs, so I can't see that there would be too much trouble getting one for the GTT. I mean, superficially, you could just put the GTR one in. It will fit.

cheers guys
Turns out, i need to send my springs back to the supplier, and get coilovers instead...
And yes,I was looking at OEM (nissan), or a manufacturer that made OEM spec shocks for the car..
As said, mine is standard, but at the same time, was trying to keep my costs less when buying shock absorbers, compared with buying Coilovers....

The B6 & KYB SR shocks, even the Nissan OEM shocks = cost more than Tein Street Advance Coilovers.....
So end result is, i need to switch anyway....
Cheers for the replies though guys :)

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...