Jump to content
SAU Community

Recommended Posts

Is this on anyone else's santa list?

Modifications list:

Performance

Power (bhp): 355 + 75hp for N20

Torque (lb-ft): 315

0-60: 4.9

1/4 mile: 13.3

Top speed: 155

Engine

Exhaust: MagnaFlow

Supercharger/Turbocharger: Coming soon

Drivetrain

Transmission: SMG sequential manual

Axle(s): IRS

Brakes

Rotors: Stop Tech 14 front and rear

Calipers: Huge Red calipers!

Suspension

Lowering Kit: KW Version 3

Shock(s) / Strut(s): KW coil overs

Sway Bars: Hotchkis

Misc.: Fully adjustable ride height

Wheels/Tires

Wheel Manufacturer: HRE

Wheel Size: 20 x 9.5 front, 20 x 11 rear

Tire Manufacturer: Continental

Tire Size: 255/30 R20 front, 305/25 R20 rear

Exterior/Chassis

Paint: Candy blue

Ground Effects: Flosman widebody kit

Bumper(s): Flosman

Lighting

Headlights: HIDs with Angel Eye halos

Turn Signals: Stealth bulbs

Interior

Dashboard: Carbon fiber accents

Gauges: Motec racing display

Pedals: Carbon fiber

Seats: Sparco

Electronics

Head Unit: Clarion VRX935DVD

Radar Detector: Passport, built in

Dash Speakers: Infinity

Front Door Speakers: Infinity

Rear Deck Speakers: Infinity

Subwoofers: JBL W12GTi

Subwoofer Enclosure(s): Custom built

Front Amplifier: JBL P80.4

Rear Amplifier: JBL P1200.1

uberm303_01.jpg

uberm303_02.jpg

uberm303_04.jpg

uberm303_10.jpg

uberm303_11.jpg

uberm303_08.jpg

uberm303_engine.jpg

Link to comment
https://www.sau.com.au/forums/topic/48314-430hp-widebody-m3/
Share on other sites

You could always custom turbo it, and give it more power. You got to remember its only a M3 not a HIGH Performance car.

Uhh... a M3 isn't a high performance car? Then what on earth is?

Adrian, I don't think its been designed as a drag car :rofl:

Link to comment
https://www.sau.com.au/forums/topic/48314-430hp-widebody-m3/#findComment-972427
Share on other sites

i think it should be doing more than a 13.3 more like mid 12's for the fact it has nitrous as well. I'm pretty sure a new stock m3 can do mid 13's or so.

I agree,

Engine M3 Convertible

Cylinders: 6

Valves: 24

Capacity: 3246 cc

Maximum Power: 252 kW / 343 bhp / 7900 rpm

Maximum Torque: 365 Nm / 4900 rpm

Acceleration 0-100km/h: 5.5 s

As you can see, not much HP between Uber's and the Factory, besides the N20... So the only thing i could think of is the speaker system brings the weight up, put the extra Hp and N20 brings it back down to the factory runs.

Well who cares Quote: Supercharger/Turbocharger: Coming soon

Link to comment
https://www.sau.com.au/forums/topic/48314-430hp-widebody-m3/#findComment-972462
Share on other sites

Guest RedLineGTR

i would say it looks okay...but i like the m3's nice and stock they come with a pretty good package for a stock car with the price tag.

with this image

uberm303_10.jpg

It think it looks like they have been trying to hard...to make it look fat just for the sake of it, rather than make it look better.

Link to comment
https://www.sau.com.au/forums/topic/48314-430hp-widebody-m3/#findComment-972466
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...