Jump to content
SAU Community

Recommended Posts

Just wondering if anyone else out there has had water in the boot of their R33 coupe???

I've had it in mine, and after a few weeks of sealing all the known/visible holes, it was still getting water inside.

Then today found out it was coming through the welded on piece of steel on the inside of the boot, above the passenger side taillight. I couldn't get the taillight out to fix it totally due to all the black silicone stuff holding it in. So all i've done is seal up all the steel joins in the boot. Hopefully this works.

ps. anyone else's r33 turbo go past the 180 speedo, with a standard ecu and no speed cut ???

Link to comment
https://www.sau.com.au/forums/topic/48358-r33-boot-filling-with-water/
Share on other sites

bah. standard speed cut happens more toward the 190'ish anyway...i mean. urr.. so I've been told :D

As for the water, yep.. had the same thing too... also, the spare tyre forms condensate on cold nights with the rubber and stuff... that's my theory anyway, as there is definitely no leaks in my boot...

dam boats love the water!

dunno about the cut wire....went to 190 then had to back off *shrugs*

i had my spare condensate as well. Always thought it was the heat from the exhaust (no heat shielding). The rubber gromets don't leak either.

Well i keep checking the boot, and no water.

So that's the leak (the passenger side taillight).

Patch it up, let the silicone dry, then all is good.

Now wait till it rusts a hole through...hehe

Anyone taken out the taillights??? I took the nuts off, and then tried to get the light out, but it felt like it really didn't want to move. What's the business with it ???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
    • Got my 34 gtt tuned last week. Car made 362 wheel horsepower at 19 psi. Turbo was the ATR43SS. Only other upgrades were haltech 2000 series. 650cc injectors, walbro 250, fmic. Pro hub dyno reads 6% lower than actual figure according to my tuner. Car is a real ripper now.  IMG_7261.mov
    • Hi everyone, I'm wondering if anyone in Melbourne (preferably West) has a non-S2 R34 front bar. If it's already off the car, even better!  Nothing too weird, I just need to get a cut-out of the hole that the front indicators clip into 🤣 (image attached for reference)   I've got a front bar from JSAI Aero, but those holes need to be cut myself, and I want to get it right so the indicators will clip securely. And my OEM bumper is a S2, so I have no reference. So looking for a member who might be able to spare me a few minutes to make a cardboard cut-out using your front bar.
×
×
  • Create New...