Jump to content
SAU Community

Recommended Posts

Hi Guys, i'm in love with my 370gt, my first car here in Australia and i'm thinking to get a new look for the interior. My question is if someone knows if newer parts from nissan would fit our babes.. for now i'm thinking on post 2018 Qasqai steering wheel and shift knobs, they look fresh and clean. What are your thoughts on this kind of mods?

Will they fit?

 

 cheers!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484203-370gt-coupe-retrofitting/
Share on other sites

You might be the first to try.

If you can do a test swap with someone that has a Qasqai before you commit.

The plugs for the steering wheel buttons might be the same, but if not you can always rewire 

  • Like 1
45 minutes ago, GTSBoy said:

Airbag compatibility is another consideration.

Do you know if is there any way to check this? like technical specs or something like this? the plug seem to be the same, but not sure about the voltage, resistance, or anything else that could involve this

2 hours ago, marcus1070 said:

Do you know if is there any way to check this? like technical specs or something like this? the plug seem to be the same, but not sure about the voltage, resistance, or anything else that could involve this

You'd be well advised to work from factory service manuals.

What do you mean "Just checked here"? Do you mean you looked around on SAU for FSMs? Or do you men you asked here? Because, you'll probably need to put more effort in than that to obtain both FSMs. Theres' no way that anyone on SAU gives 2 shits about Qashqais, so won't have a manual. And, you are probably the 1st person ever to want to swap a wheel from a more modern Renault Nissan into a V series Skyline.

I looked on infiniti g37 service manual, and only show info about the replacement procedure, there's no technical details on it.

14 minutes ago, GTSBoy said:

And, you are probably the 1st person ever to want to swap a wheel from a more modern Renault Nissan into a V series Skyline.

Yeah, probably XD.. i prefer this newer models much more than those carbon fiber aftermarket ones, and they would be waaay cheaper also, so gain/gain if it works

 

well, i quit.. if it was just a project car or track, i would probably do it, but is my daily one.. so i will get one of these and it's fine: 
https://www.steeringcover.com/mewant-hand-stitch-sewing-black-leather-suede-carbon-fiber-car-steering-wheel-cover-for-infiniti-g25-g35-g37-2007-2013-ex35-ex37-2008-2013-q40-q60-2014-2015-qx50-2014-2018.html

But thanks for help @GTSBoy

Edited by marcus1070
41 minutes ago, marcus1070 said:

well, i quit.. if it was just a project car or track, i would probably do it, but is my daily one.. so i will get one of these and it's fine: 
https://www.steeringcover.com/mewant-hand-stitch-sewing-black-leather-suede-carbon-fiber-car-steering-wheel-cover-for-infiniti-g25-g35-g37-2007-2013-ex35-ex37-2008-2013-q40-q60-2014-2015-qx50-2014-2018.html

But thanks for help @GTSBoy

o0ooo.. these sew on's are a huge commitment. Get the video before you buy, and check around on how long it takes for a first timer, not a professional. I think I saw something on youtube which made me hesitant to go down that path.

Yeah, i seen it. It require some patience to do. But i already installed my niftycity module,, so with my car i have it xD.. but i guess it's necessary to remove the steering wheel from the car, even they saying that is not required, doing that inside the car would be a pain in the axx.

Please report back with how you go! They look great in the photos. But then I saw the list of ingredients and went "yeah nah, I would completely stuff that up".

Quote

What’s in the box

  • 1 Mewant steering wheel cover
  • 1 installation instruction
  • 1 double-side tape
  • 2 sew thread
  • 1 thimble
  • 1 needle
  • 1 small blade

 

@Vee37, do you know of any professionals who do this? I like the idea of getting a well fitting cover instead of going for a whole new steering wheel.

  • Like 1
44 minutes ago, soviet_merlin said:

...snip...

@Vee37, do you know of any professionals who do this? I like the idea of getting a well fitting cover instead of going for a whole new steering wheel.

No, the most obvious target, you would normally pay Motor Trimmers, who charge by the hour, it looks very labor intensive in time, and therefore I think it wouldn't be cheap.

One thing I have thought to look into is something like Air-Tasker. At least then you are not paying a skilled professional rate to perform simple repetitive monkey work.

Just did a quick search on YouTube, and found this vid. It took him 6hrs.

One thing I did notice before I fond the above vid, there are different patterns to stitch it to together, some would obviously take longer, but as expected, probably look better.

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...