Jump to content
SAU Community

Release bearing part number R33GTSTS2?

Torques
 Share

Recommended Posts

Torques Mentor

Torques

Posted
Posted

I'm trying to order the release bearing, the part number seems to be 30502-69F10 (?)

Nengun says it is no longer available.

https://www.nengun.com/oem/nissan/30502-69f10

1997 GTSTS2

Is there a replacement part # ?

Cheers

 

 

 

 

soviet_merlin Mentor

soviet_merlin

Posted
Posted

For what it's worth, Amayama lists some potential replacements:

https://www.amayama.com/en/part/nissan/3050269f10

I don't know whether this is right for you though.

What is your situation?

I have started doing research for a clutch refresh on my car and the release bearing comes with the Nismo kit that I'm looking at.

  • Like 1
BK Grand Master

BK

Posted
Posted
4 hours ago, Torques said:

Hi,

The situation is that I need the standard OEM release bearing for the standard clutch ... :)

Even the genuine one is an NSK bearing - it's not like Nissan make their own bearings.

Torques Mentor

Torques

Posted
  • Author
Posted

Hi,

Yes, thanks for the input.

I'm more than happy to buy from NSK or NTN or SKF.

 

It would help if I had the OEM dimensions but according to SKF I might have found something using

30502-69F10

https://vehicleaftermarket.skf.com/mt/en/products/VKC3737

 

 

 

 

 

BK Grand Master

BK

Posted
Posted
On 19/11/2022 at 3:06 AM, Torques said:

Is there a replacement part #

Most people will be using the Koyo bearing RCT40SA3 from somewhere like CBC here in Australia.

There is a factory Nissan replacement of 30502-69F1A, but it's 100% a Koyo bearing anyway.

Torques Mentor

Torques

Posted
  • Author
Posted

Hello,

Thanks for the input.

 

I also saw the 4075-1S listed as R33GTST  bearing

https://koyo.jtekt.co.jp/en/products/detail/?pno=RCT4075-1S

Here's the 40SA3

https://koyo.jtekt.co.jp/en/products/detail/?pno=RCT40SA3

 

Major difference seems to be 'd' which is 74.5mm vs 82.2mm

Too bad I don't have an old bearing / carrier  to check.

 

 

 

 

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      What brakes on R34 GTT(Europe)

      By Kinkstaah · Posted

      Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • niZmO_Man
      Lock up the old for sale / wtb threads.

      By niZmO_Man · Posted

      Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...