Jump to content
SAU Community

RB20DE NEO accelaration/cruising "problem"

Kapr

By Kapr,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Kapr Collaborator

Kapr

Posted
  • Author
Posted (edited)

It is factory manual(5 speed)

The lag is "most" noticeable on 4th gear but it can stil "lag" on 3rd or 2nd...but on the 2n/3rd it is really like "milisecond" loss of power but gas pedal reacts normally.

And it not do that all the time...the "loss of power" is only sometimes and the "i dont know what you want me to do" on 4th is happeing often like the just do not react to the gas pedal(it reacts i can feel/hear it but like nothing happens for a moment)

But as i said it i only a cruising problem and when i try to maintain the speed. 
When i drive it "harder" the car behave as it should...



 

Edited by Kapr
joshuaho96 Veteran

joshuaho96

Posted
Posted
16 hours ago, Kapr said:

It is factory manual(5 speed)

The lag is "most" noticeable on 4th gear but it can stil "lag" on 3rd or 2nd...but on the 2n/3rd it is really like "milisecond" loss of power but gas pedal reacts normally.

And it not do that all the time...the "loss of power" is only sometimes and the "i dont know what you want me to do" on 4th is happeing often like the just do not react to the gas pedal(it reacts i can feel/hear it but like nothing happens for a moment)

But as i said it i only a cruising problem and when i try to maintain the speed. 
When i drive it "harder" the car behave as it should...



 

You really need a diagnostic cable and logging of core ECU parameters to get to the bottom of this. 

  • Thanks 1
GoHashiriya Community Regular

GoHashiriya

Posted
Posted

In my experience the MAFs are pretty robust in these, mine is original and with 255k on it. I did re-sodler the joints at one point but that wasn't my issue, it was the CAS. I would even take a punt at getting a used original MAF from yahoo auction if mine was suspected of funny business - there's one right now at about EUR 50. 

You said your coils were splitfire, but how old are they? They will fail just like the OEM ones and many have 100k+ kms on them now. I thought splitfire went out of business a while ago?

The parts GTSBoy mentioned earlier really shouldnt be too expensive. I went ahead and just threw those exact parts at the car for preventative maintenance - OEM coils/plugs/harness, soldered MAF, rebuilt CAS and Walbro - and, touch wood, it's running fine. 

All this stuff won't be so expensive and you should really expect to replace them anyway on a 25yr old car. 

  • Thanks 1
Kapr Collaborator

Kapr

Posted
  • Author
Posted (edited)

@joshuaho96 Do we need any "special" software? I know(99%) that the car has no OBDII port and that i have some extension cord to the interface to OBDII
 

@GoHashiriya
Can you send me the link? I do not see that(it is friday so maybe it was sold)
Yeah they were used but i dont know how many km they done but i presume that if some of the coils gone bad the car would run on 1/X cyl less same as the problem with the connector?
As for the parts...yeah coil are old splits...plugs and harness is brand new...MAF is OEM and upon inspection looks good...connector to that too. CAS i rly dont know(can it do that?)

For the info i have.
I took the car to the highway and the symptoms are that most noticeable "lack" of everything on 4th and 5th gear.
When i try accelerate just a little...the car and the engine change sound like it want it to do something but nothing happens...sometimes it start to accelerate but sometimes it does not...when the car changes the sound but it does not accelerate i would describe that sound as...some type of "chooking" or breathing? The sound is differenet and it changes to "normal" accelerating sound soon as the car starts to accelerate...maybe stuck/dirty throttle body?

BUT if i put "pedal to the metal" car behaves normaly and all those "problems" above are nowhere to be found.

IT IS really only when iam trying to maintain the speed or slightly accelerate.

Edited by Kapr
  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
×
×
  • Create New...