Jump to content
SAU Community

Recommended Posts

Hi all I'm having a few problems with my r34 gtt rb25dett neo it's completely stock. It's done 200,000 just got rebuilt with forged rods and pistons. Running 7 psi on the stock turbo.  Iv driven it another 4,000 km roughly and I noticed about a week ago in 3-4 grand rev range in 2,3 and 4th gear it would lose power upon acceleration.  But I drove it today. And it's having the same sort of issue but only when I get boost like runs fine in first but if I hit second and get past 1 psi of boost it like jerks and loses pretty much all go to it. The original issue i couldnt hear the engine really struggling i just sort of felt the lose of power but the issue im having now i can definently hear the engine die. It also hunts slightly when idling I'm thinking it's a fuel issue iv ordered a pump, reg and coil packs. I was just wondering if anyone else has had this issue. It still gets boost if I power through i get to 6 psi and it doesn't feel like it changes or gains more power.

9 hours ago, My r34 always has issues said:

Hi all I'm having a few problems with my r34 gtt rb25dett neo it's completely stock. It's done 200,000 just got rebuilt with forged rods and pistons. Running 7 psi on the stock turbo.  Iv driven it another 4,000 km roughly and I noticed about a week ago in 3-4 grand rev range in 2,3 and 4th gear it would lose power upon acceleration.  But I drove it today. And it's having the same sort of issue but only when I get boost like runs fine in first but if I hit second and get past 1 psi of boost it like jerks and loses pretty much all go to it. The original issue i couldnt hear the engine really struggling i just sort of felt the lose of power but the issue im having now i can definently hear the engine die. It also hunts slightly when idling I'm thinking it's a fuel issue iv ordered a pump, reg and coil packs. I was just wondering if anyone else has had this issue. It still gets boost if I power through i get to 6 psi and it doesn't feel like it changes or gains more power.

Idle hunting is a sign of air leaks. It usually means the ECU is trying extreme measures to stay on target idle speed. Easy way to validate this theory is to unscrew the TPS adjustment and tweak it ever so slightly to bump the TPS voltage above idle. This will disable idle control. An engine without vacuum leaks either internal or external should experience a low idle or no change in idle when you do this.

52 minutes ago, My r34 always has issues said:

Could that also cause the issues that were occurring when driving. 

Less likely. That's more likely to be something electrical/electronic. And that could also cause the idle problems too.

For helping look for vacuum leaks, grab a can of carby/brake cleaner spray and go over the various joints. If idle changes, you've found a leak.

Alrighty my driving issues sorted not low on power no more I did check for a boost leak using carry cleaner awesome f*king idea BTW nothing happened, then checked the tps voltage was good and changed with the throttle position. I also unscrewed and tested it didn't get a change in revs. I changed the spark plugs and now it's all sweet. My idle still slightly varies about 50 to 100 rpm but not frequently.

Thank for the help BLOOODY LEGENDS 

10 hours ago, My r34 always has issues said:

Alrighty my driving issues sorted not low on power no more I did check for a boost leak using carry cleaner awesome f*king idea BTW nothing happened, then checked the tps voltage was good and changed with the throttle position. I also unscrewed and tested it didn't get a change in revs. I changed the spark plugs and now it's all sweet. My idle still slightly varies about 50 to 100 rpm but not frequently.

Thank for the help BLOOODY LEGENDS 

I have experienced what I would describe as idle dropping out in moments with counterfeit spark plugs but it wasn’t really idle hunting. It felt like a misfire almost. It would drop and then recover as the idle control caught it. Never stalled but noticeably felt strange and was fixed with new genuine plugs. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...