Jump to content
SAU Community

Calling People in VIC who assemble their own RB engines.

Seffdaddy

By Seffdaddy,
in Engines & Forced Induction

 Share

Recommended Posts

Seffdaddy Newbie

Seffdaddy

Posted
Posted

Looking to hear from the guys who are assembling their own RBs in Melbourne. 

Does anyone have a machinist they know and trust who could provide some level of advice and complete the machine work, then send me off to assemble it myself?

I should state:
- I understand that engine builders make their money by building engines themselves. Not expecting anything for free, in fact I'm keen to pay them.
- Given I will be assembling the engine, I accept all responsibility if in the event it was to fail (would happily put this in writing).

The idea behind this is to get good at building my own engines, enjoy the process and become self-sufficient. I have built an RB25 myself almost 10 years ago and I was a mechanic for several years, however I recognise I'm not an engine builder.
 

I've dropped off and picked this block up from two workshops already where they promise to do the work, nothing happens for 3 months and I get over it. I just want out of this cycle and to drive/enjoy my car.

any help much appreciated 🙏🏼

  • Like 1
Shoota_77 Veteran

Shoota_77

Posted
Posted

It was many years ago I got my engine machining done but I had a very good experience with Headspec in Clayton.  Frank was the guy running the show back then and I think it was Michael who was working for him (may be in charge now??).  They were great to deal with and everything was done as per my requests and expectations.

Nothing wrong with wanting to do it yourself and as you say, it's all on you if it turns to shit!

Good luck!!

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

Frank and Michael are still around, and are still great. However, like most people who are still around and still great, they're very busy. So you may have a 3 month wait purely because of the backlog of things they already have on the go.

I always say a blown up RB is a 1 year process :D. But to be fair, my experience with Headspec was quite a lot of waiting until they got to my job, then when they did - it was completed in a couple of weeks. So I suppose there's plenty of work for competent engine builders out there.

Seffdaddy Newbie

Seffdaddy

Posted
  • Author
Posted

I have met Frank and Michael from Headspec. They are both lovely guys, gave me plenty of time and were always happy to chat and answer questions when I saw them in person. They have done some fab work for me previously. Unfortunately, they were the second workshop I left the block with. Potentially they're just too busy. One of the engines he was working on was being built over a 12 month period (also an RB). The block sat there for three months just to have them assess the block and quote a build (never happened). I actually felt quite comfortable with them and thought they would do a great job. I'm just not in a position to wait 12 months or someone to build this engine :(

Shoota_77 Veteran

Shoota_77

Posted
Posted
1 hour ago, Seffdaddy said:

I have met Frank and Michael from Headspec. They are both lovely guys, gave me plenty of time and were always happy to chat and answer questions when I saw them in person. They have done some fab work for me previously. Unfortunately, they were the second workshop I left the block with. Potentially they're just too busy. One of the engines he was working on was being built over a 12 month period (also an RB). The block sat there for three months just to have them assess the block and quote a build (never happened). I actually felt quite comfortable with them and thought they would do a great job. I'm just not in a position to wait 12 months or someone to build this engine :(

Righto, bummer!  That makes it tough.  One thing Covid has taught us all, you want something bad enough, you gotta wait!

Could be worth taking it out of town?  Somewhere regional like Bendigo or Ballarat as they MAY be slightly less backlogged?  No one here in Shepp I would necessarily recommend unfortunately....

I hope you get it sorted out.  

  • 1 month later...
funkymonkey Grand Master

funkymonkey

Posted
Posted

I reckon if you were to find a retired engine machinist who can mentor you, you’d be able to fill in the gaps with your own skills.

maybe have some conversations with the guys who are running the shops now about who they did their apprenticeships with?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • TurboTapin
      New fix for low tyre pressure from bmw

      By TurboTapin · Posted

      CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...