Jump to content
SAU Community

Recommended Posts

As we all know petrol prices are phuckin ridiculous at the moment, especially if ur driving imports cars and the like. My question is which premium unleaded petrol is best to use here in PERTH, Caltex Vortex or Shell Premium Unleaded?

And don't say use BP Ultimate...! :D

ta :D

Link to comment
https://www.sau.com.au/forums/topic/48535-quick-petrol-question/
Share on other sites

if ur running the stock ecu shell premium will do u fine, its 96 RON. its even better if u shop at coles as u get 4c off per litre :D

caltex vortex is 95 RON and has an injector cleaner in it. it make my car ping with stock ecu stay away from it.

Gull's premium unleaded is suppose to be 98 RON, but i haven't used it yet.

that said if you have an afterward ecu or major mods i would only use bp ultimate 98.

As you prolly know - BP Ultimate is only made in Kwinnana and distributed Australia wide (kinda sh1tza when it's cheaper in Sydney than Perth doesn't it). I suspect that it is also sold under another brand, but have never had this confirmed.

For this reason alone, it should be the freshest fuel providing you buy from a popular station.

Paul, that reminds me - make sure they drain my fuel and change the fuel filter before firing up the new donk- that crap's been sitting in my tank for 8 months now!

caltex vortex is 95 RON and has an injector cleaner in it. it make my car ping with stock ecu stay away from it.

Gull's premium unleaded is suppose to be 98 RON, but i haven't used it yet.

Gull gets the dregs of the other fuel companies, kind of the crud that's left over from all of the crude oils

Caltex Vortex is 97RON though, but yeah has cleaner in it

thanx for the replies guys, apparently and sadly my line is a *cough* n/a *cough* :Oops: but yea never use normal unleaded but, always use premiums at least, ok just checked their websites and shell is 96RON and vortex is 95. But the thing is i think i always gets more kms from using vortex, no noticable difference in terms of performance though. and yea i kinda mix the 2 together sometimes, i hope thats ok?

:)

Hi Guys. There is another thread going in the General Automotive about different fuels at the moment. I just left a message on that to direct people to the thread below from back in May. There is a fair amount of discussion in it, but some quite informed views. The main thing to note for us in Perth is that every last drop of fuel that you buy in Perth originates in BP Kwinana. Shell, Caltex and everyone else buy the raw 95 ron Premium off BP and add their own soup to it to make it theirs. Shell claim their standard premium is 96 ron, but they are starting from a 95 ron basic fuel, bought from BP. So anything else that they gain in octane rating is achieved through additives.

BP Ultimate is the only thing to use!

Here's that thread:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=38750

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...