Jump to content
SAU Community

Recommended Posts

I'm getting some brown sludge in my radiator and coolant reservoir. The engine was rebuilt by the previous owner with forged pistons and rods, and new turbos, etc. I'm suspecting the oil is mixing with the coolant because of the stock oil cooler thing. I read that some of the gaskets can fail and cause the oil and coolant to mix. How do I test if this is the problem? 

17 minutes ago, kevboost7 said:

I read that some of the gaskets can fail and cause the oil and coolant to mix. How do I test if this is the problem? 

It's not a gasket failure. AFIAK, there are no gaskets separating the two fluids. If it lets one into the other, it is broken metal.

  • Like 1

Also, it's highly unlikely to be the cause, especially if there is no milkshake under your oil cap.

Goop in the cooling system is almost always rust from the block due to someone along the way not running enough coolant/rust inhibitor. If it worries you, you can try and flush everything out for a few times.

Auto or manual car, there are multiple places for oil and water to mix

I have never heard of one of those warmer/cooler thingos failing before , is that a thing?

7 minutes ago, The Bogan said:

I have never heard of one of those warmer/cooler thingos failing before , is that a thing?

Yeah. Particularly on cars where the maintenance, particularly the coolant maintenance, has not been up to scratch. Coolant turns acidic, eats the HX out, and at some point it becomes too thin to resist the pressure and you get horrible things happen. RBs are moderately famous for it. It's not like it's a problem that happens to all of them. But there've been enough events that people fear it.

  • Thanks 1
16 minutes ago, GTSBoy said:

Yeah. Particularly on cars where the maintenance, particularly the coolant maintenance, has not been up to scratch. Coolant turns acidic, eats the HX out, and at some point it becomes too thin to resist the pressure and you get horrible things happen. RBs are moderately famous for it. It's not like it's a problem that happens to all of them. But there've been enough events that people fear it.

Fair enough

OP: If the car is a auto what's the trans fluid look like because the trans cooler in the radiator may have a issue

If there's any milk shake on the trans dip stick you need to get that sorted pronto before the auto eats itself 

 

The car is a manual. The fuild in there has been replaced too.

There was actually milkshake under the radiator cap. In fact, the whole coolant was brown milkshake last year. I drained all the brown liquid out via radiator. Replaced the OEM radiator with a Koyo and Replaced all the coolant hoses under the plenum. I re-filled with fresh green coolant, and now i see brown spots contaminating the coolant again. Its not completely taking over like before though. 

I really hope its just left over rust not flushed out properly. 

1 hour ago, kevboost7 said:

The car is a manual. The fuild in there has been replaced too.

There was actually milkshake under the radiator cap. In fact, the whole coolant was brown milkshake last year. I drained all the brown liquid out via radiator. Replaced the OEM radiator with a Koyo and Replaced all the coolant hoses under the plenum. I re-filled with fresh green coolant, and now i see brown spots contaminating the coolant again. Its not completely taking over like before though. 

I really hope its just left over rust not flushed out properly. 

Send your oil out for analysis for peace of mind. 

If you have an active leak it would be badly contaminated again by now....I'm pretty sure it is just residual.

BTW I suggested checking under the oil cap, not radiator cap.

Finally, cooling system pressure testers are cheap to buy, that will tell you with a reasonable degree of confidence if there is a leak anywhere in that system.

  • 1 month later...
On 10/23/2024 at 5:32 PM, Duncan said:

If you have an active leak it would be badly contaminated again by now....I'm pretty sure it is just residual.

BTW I suggested checking under the oil cap, not radiator cap.

Finally, cooling system pressure testers are cheap to buy, that will tell you with a reasonable degree of confidence if there is a leak anywhere in that system.

If i used a cooling system pressure tester, would it show me a leak with the head gasket? Ive used one before to chase down a leaking coolant hose. Not sure if this will work on the oil-cooler warmer. 

yeah a coolant pressure test will tell you if you have a leak anywhere as it just pressurises the system. If it drops from where you set it, say 1 bar, you have a leak somewhere

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...