Jump to content
SAU Community

Recommended Posts

Hi.
I need a new clutch for my gearbox.
It is a factory smallbox behind RB20DE NEO.

What options do i have?
If iam not mistaken the gearbox should be the same as in R32 GTST and Nissan S14/S15?
I found some Xtreme Clutch Stage 1 for S14/S14 (i dont know if you know the brand) (UK)

OR...is the clutch same as in the bigbox from RB25DET?

 

Thank you!

 

Edited by Kapr
Link to comment
https://www.sau.com.au/forums/topic/486239-rb20de-neo-smallbox-clutch/
Share on other sites

1 hour ago, WMDC35 said:

If it's a factory 20de manual probably has the 6 bolt flywheel in which case the det clutches won't work as they're 9 bolt.

Really? That's piss weak. I didn't know they hobbled the shitboxen that badly.

OK. So probs need to buy a flywheel too. But that's not too bad.

46 minutes ago, GTSBoy said:

Really? That's piss weak. I didn't know they hobbled the shitboxen that badly.

OK. So probs need to buy a flywheel too. But that's not too bad.

Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.

  • Like 1
Posted (edited)

Ok so no 4cyl clutch...

Yeah it is a factory manual.

So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?

 

EDIT: https://www.ebay.com/itm/224291042776
Is this ok?

 

EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap)
It will be there for a little while.
Iam planing to do bigbox or BMW tranny..

Edited by Kapr

Hi.
I tried to find anything to go be.
I found this: https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type

Can i use this clutch kit in my case? 
Engine RB25DET NEO
Gearbox "Small box" FS5W71C
It is a Push type clutch a and gerabox(slave cyl)
THX

4 hours ago, GTSBoy said:

That's essentially the clutch that I have behind my Neo. Big box of course, but it won't matter that you have a small box, as you won't have it for too long.

Being behind an RB25DET, we know he won't have the small box for long at all...

6 hours ago, GTSBoy said:

That's essentially the clutch that I have behind my Neo. Big box of course, but it won't matter that you have a small box, as you won't have it for too long.

So it should work in my case? 
I does not say R34 but it say push(i have push gearbox/clutch right now)

No i wont...and i do not drift/race or do anything crazy with car so even a small box should be ok for a couple of months

21 minutes ago, Kapr said:

No i wont...and i do not drift/race or do anything crazy with car so even a small box should be ok for a couple of months

Are you planning to ever come on boost with the RB25DET?

The torque of the motor alone will break the little box. It's not a matter of if, it's when.

  • Like 1
27 minutes ago, Kapr said:

I does not say R34 but it say push(i have push gearbox/clutch right now)

That's because R34 RB25DET is a pull clutch gearbox.

I have that clutch, behind 25Neo, in front of R33 gearbox.

I have brand new R34 turbo gearbox, in a box (cardboard) in the shed right now, and it will be getting used with the same engine and clutch, because I also have, in a much smaller box next to it, the front plate to convert the new box to push clutch.

  • Thanks 1
30 minutes ago, Kapr said:

No i wont...and i do not drift/race or do anything crazy with car so even a small box should be ok for a couple of months

 

7 minutes ago, MBS206 said:

Are you planning to ever come on boost with the RB25DET?

The torque of the motor alone will break the little box. It's not a matter of if, it's when.

A couple of months of gentle driving will be fine. There is a risk that you will kill it. A heavy workout will probably kill 3rd gear. Continued use will wreck the input shaft bearing.

Hi

I wrote to the xtreme clutch and they wrote me this:

Thanks for contacting us.
I already spoke with engineering team and was told that RB25DET with a non-turbo fs5w71c gearbox would not work. It would not hold the horsepower and does not bolt to that engine without some sort of adapter plate or modified bellhousing.
 

 

I know about the power(it will hold stock power)

But i rly dont know about not bolting to the engine without some adaptor??

Is this true? I thought it should mate up without any problems...

22 minutes ago, Kapr said:

But i rly dont know about not bolting to the engine without some adaptor?

It's not true. RBs only have one gearbox bolt pattern. I mean, I was surprised that there was a different clutch bolt count on the weak NAs, but that's on the flywheel, which is not part of the engine.

  • Thanks 1

Yeah i thought so too...but iam kinda confused what is what and what to get to make it work.

I know i need a push clutch(i get that with that kit i post) 

It has flywheel too and from what i found it should "mate" with RB25DET NEO.

But i dont rly know about the bolt count cuz i saw many videos about clutch on RB25DET/NEO and all of them has 6 bolt pattern...

Like here for example...

And if i google clutch kit for RB25DET NEO like "all of them" has 6 bolt flywheel...

 

Look, it's very simple. The 6 bolts or the 9 bolts are interface between the clutch and the flywheel. Any flywheel will bolt to any RB crank - the bolts in the centre there are the same same.

So, you just need teh flywheel to suit the turbo clutch. That's all. No more to think about. Get both, boost off into the sunset. (only without the boost).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...