Jump to content
SAU Community

Recommended Posts

the VIN number's the only REAL way to tell... most of the limited edition came with keys that had the 40th/60th anniversary or 100 million sales sign on em etc. Some V Selections and 40th anniversary ones came with gold GT badges. but yeah if you really wanna know then grab the VIN number and decode it.

i'll try and get the vin number but the thing is i still dont understand why it has a series 1 wing on a 97 model. he reckons a few came out like that but thats the first i've seen of em. also i havent heard of a limited edition skyline neither. i know of the 40th anniversary.

i'll try and get the vin number but the thing is i still dont understand why it has a series 1 wing on a 97 model. he reckons a few came out like that but thats the first i've seen of em. also i havent heard of a limited edition skyline neither. i know of the 40th anniversary.

You would need the VIN number to do a REVS check anyway so what are you waiting for!

Soory about the poor picture quality but our camera at work is poo. First pick is the Steering wheel. I'm pretty damn sure it's standard as it also has Nissan embossed in it. Second pic is the stiched badge on the seat, and thrid is the badge on the rear quarter panel. Chassis Number is ECR33 134519.

actually scrap the car above, found a better skyline from this place called "Complete Compliance", thats what it says on the card, or at the shop its called "Auto Fix and Tune".

does anyone know anything about em or had any experience with em?? they r in the NSW suburb of Moorebank.

any info would be great.

thanks.

actually scrap the car above, found a better skyline from this place called "Complete Compliance", thats what it says on the card, or at the shop its called "Auto Fix and Tune".  

does anyone know anything about em or had any experience with em?? they r in the NSW suburb of Moorebank.

any info would be great.

thanks.

I actually called these guys yesterday. They are one of the only 3 shops in Sydney to be listed on RAWS database as being able to comply R34's right now. They seemed to be very knowledgable when I spoke to them.

Anyway, the car you mentioned does seem to be a 40th Anniversary edition.

Here's what FAST says about it:

ECR134519

Model Code: GGKBRTFR33VZACAYDM

Production date: Jan-98

Color: QM1 White

Body: 2 door coupe

Engine: RB25DET

Model: GTS25t Type-M

Transmission: 5 Speed Manual

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...