Jump to content
SAU Community

Recommended Posts

What in?

I've heard them described as a 'de-aeration device'.

Basically, they provide a constant head of fuel to the EFI pump, so that, even on a near empty tank during hard cornering, you will always have fuel available for the EFI pump.

In-tank pumps have a sort of box surrounding the pump pick point.

In an external setup, you have a low-pressure pump which keeps the tank supplied with fuel from the fuel tank, and also excess fuel from the rail returns to the surge tank. Any 'overflow' returns to the fuel tank.

Most factory EFI cars already have them installed somewhere.

Link to comment
https://www.sau.com.au/forums/topic/4906-surge-tanks/#findComment-76316
Share on other sites

There's nothing to be gained performance-wise, other than you won't run out of fuel on a hard corner with a low fuel load.

Checkout www.efihardware.com

If you're already running a (factory) EFI car, then you shouldn't need one (I'm guessing your nic says you have a R34 GTt)

Link to comment
https://www.sau.com.au/forums/topic/4906-surge-tanks/#findComment-76564
Share on other sites

as has been said surge tanks are used to provide constant supply of fuel to a large fuel pump. there are no horsepower gains but many people recommend them when installing a bigger fuel pump, especially if that fuel pump is too big for the std tank.

it would only be neccessary if a)doing trackwork and needing constant supply of fuel given corenering etc

b)have big fuel system and pump which is external and requires a surge tank

Link to comment
https://www.sau.com.au/forums/topic/4906-surge-tanks/#findComment-76653
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I found a supplier for an arm in NZ. https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-rh-side?srsltid=AfmBOopMdfCFDc_8yVZZ9kq5nIngPHRTBzUU8v4SAptJaRO52Wjs0bC6 I looked closely at the photo of that one and the Z1 arm, and it's the same bloody arm. Scratches all match in the photo 😂 How hard is it to change that joint? Also they seem to be listing two options https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-balljoint-rh-side?_pos=1&_sid=229acde44&_ss=r And now I have no idea what size I'd need yay
    • Ill review it again, from memory when I first saw some of Trailer Park Boys I wasn't a huge fan. I ended up at Letter Kenny after watching Shoresy, which is a bit ass backward, ha ha
    • "lol dunno" either But like you, I can't see any reason they would need to be different LHD to RHD
    • I agree with you WRT the hard top. MX5's may be one of the better looking soft tops but I cannot think of ANY car, EVER that looks better with a soft top vs a hard top (or a designed roof). At all, ever. I also feel this way about the C5 Vette, the Z06 looks horrible compared to it's original form, it has an exaggerated version of the differences you're talking about.  
    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
×
×
  • Create New...