Jump to content
SAU Community

Recommended Posts

  • 2 months later...

I think Theo's R32 has just been upgraded to one, must be capable of a fair amount (there was some actual testing data posted on Mario's section on the FF boards, but has since been deleted?). IIRC it was worth 1350 hp... damn expensive support systems!

PM Theo.... he bought the first one that Advan brought into the county and would be able to tell you if they are a good thing or not. It was fitted to his car at Jamobree but mechanical problems had him sit in the parking lot :):(;):( Would have been nice to see what it goes like now

The T88-38GK is the best thing i have done. So far we are at 28psi and have made 721hp at the tyres, that is about 938 at the fly wheel. As far as driving on the street i think it way to big. As the boost does not come on until about 5500rpm. Jambaree we ran 9.759 @ 151.26mph on sunday morning. Just don't think the turbo will do it for you because you will need to upgrade the intercooler as well.

Need any help at all just call 0418742486

Theo

So it must be wrong...
about 938 at the fly wheel.

Seems like Theo has about 100 bhp to go to make the Trust quoted output, looks to me like the Trust quoted power output isn't too far wrong.:)

BTW, how did you calculate the transmission losses Theo? The 217 bhp seems a little high, based on my experience. I would have expected around 110 to 120 bhp with a dog box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...