Jump to content
SAU Community

Recommended Posts

is it only the right mirror that needs to be replaced troy?

intrusion bars i will get my bro in law to do... so thats not too much of an issue but where do u actually get them from??

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989185
Share on other sites

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

oh when i make them i use 70x25mm box section and make it in 2 sections so you can get it in the door....then i join the two peices up by using 3 peices of 20x20 stacked on top of each other and i make those slide into each peice by about half the length of each 70x25 box section(telescopic)....then i weld it all up in place and by the time youve welded them it takes up the 7mm diffrence in the 3 peices of 20x20(20x3 =60...inside of main intrusion bar is around 67mm)make any sense?Why dont you do them yourself?You say you are a panel beater by trade,shouldnt be too hard for you......As it is your safety thats is at stake,and its usually only the rh glass that needs to be done...you could change the other side if you want to be anal and keep them both the same

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989322
Share on other sites

ni you must be stoked!!! My car made it to Sydney a couple of weeks ago, apparently waiting for parts for compliance?? It's been that long that it doesn't really feel like i've bought a car anymore, it's just this thing that i have to keep trying to move forward. It must feel great to finally get to drive the beast!

AND SHAN REPLY TO MY EMAILS/PM'S/MSN MESSAGES YOU LAZY BASTARD :P i need to bout this Masa kit...

what was the reason for your hold up ni? I had a 2 import approvals go missing.... :)

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989366
Share on other sites

oh when i make them i use 70x25mm box section and make it in 2 sections so you can get it in the door....then i join the two peices up by using 3 peices of 20x20 stacked on top of each other and i make those slide into each peice by about half the length of each 70x25 box section(telescopic)....then i weld it all up in place and by the time youve welded them it takes up the 7mm diffrence in the 3 peices of 20x20(20x3 =60...inside of main intrusion bar is around 67mm)make any sense?Why dont you do them yourself?You say you are a panel beater by trade,shouldnt be too hard for you......As it is your safety thats is at stake,and its usually only the rh glass that needs to be done...you could change the other side if you want to be anal and keep them both the same

sweet as thanks troy... my bro in law has the welder so i'll just get him to do it for me... hes a lot better with the welder than i am.

thanks for the instructions mate.

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989662
Share on other sites

ni you must be stoked!!! My car made it to Sydney a couple of weeks ago, apparently waiting for parts for compliance?? It's been that long that it doesn't really feel like i've bought a car anymore, it's just this thing that i have to keep trying to move forward. It must feel great to finally get to drive the beast!

AND SHAN REPLY TO MY EMAILS/PM'S/MSN MESSAGES YOU LAZY BASTARD :P i need to bout this Masa kit...

what was the reason for your hold up ni? I had a 2 import approvals go missing.... :)

hehehe yeah very happy its finally here... makes it all seem worth it :)

the main hold up was myself getting the money together in time... other than that everything else went pretty smoothly.

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989674
Share on other sites

nark come past my work i'll fix ya a mirror for ya :)

 

and yeah, it is only the right one that needs to be flat

hehehe cool... once i get a UVP for it i'll drive over ur side of town :P

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989675
Share on other sites

what's a UVP? oh wait... Unregistered Vehicle Permit??? Do you have details on that because my car might be down here in Melbourne before it can be regoed as well...

cheers.

oh and if you see or talk to Shan, tell him to reply to my various msg's!!! :)

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989682
Share on other sites

lol chinny... yeah thats what it is... u have to ring vic roads to get em... u can either pick em up or have it faxed thru... cant remember the costs involved... depends on how long u want it for.

Link to comment
https://www.sau.com.au/forums/topic/49465-the-beast/page/3/#findComment-989738
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...