Jump to content
SAU Community

Recommended Posts

i got a GTS, n/a (RB25) and my mate has a 180sx (CA18), also n/a he wants to add aftermarket parts to it, in the hope that he will beat me in a drag down southies. who will win? is there n e chance he will win? is it true that i have 142kw? and he has 101kw? please help, i already owe him $50 for a st00pid bet and im hopin to win it bak :uh-huh:

cheers

Link to comment
https://www.sau.com.au/forums/topic/50063-me-vs-my-mate/
Share on other sites

ca18 180's never came in n/a... i had one...

you'll most probably lose to a ca18det, due to it being lighter and exactly like an rb20det only with 2 cylinders and .2L less.

Link to comment
https://www.sau.com.au/forums/topic/50063-me-vs-my-mate/#findComment-996830
Share on other sites

If you want to race things and win, the gts is not the car to use. If you'd like to drive around in style and comfort the gts is quite good.

On the other hand...

Nitrous oxide is the easiest way forward (no not a pun). Your engine with the right setup will live with up to a 150HP shot. You will need a larger fuel pump and a set of colder heat range plugs.You will have change from $2k though not much if you don't do most of the work. I put a kit together quite some time ago on a pretty stock GTST from second hand parts I bought around the traps. The same kit plus other bits is now on 2rismo's car and he is into 11's with a little less gas than I was running. A free flowing exhaust is a good start before undertaking the nitrous kit. Oh and the nitrous kit is illegal to run on the street in WA but, fine for the drags. Removing the bottle is very easy to manage for driving around town.

Link to comment
https://www.sau.com.au/forums/topic/50063-me-vs-my-mate/#findComment-997152
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...