Jump to content
SAU Community

Recommended Posts

Piss easy mate; dont send them anywhere. On the front headlights, get regular car wax (mothers/meguiars/eagle ) and put a nice thick coat over the entire headlight cover. leave to dry. Buff off with clean cloth and presto! nice and shiny! My headlights on the front were all frosted/yellowish and my mate told me to try this and they came up excellent.

Piss easy mate; dont send them anywhere. On the front headlights, get regular car wax (mothers/meguiars/eagle ) and put a nice thick coat over the entire headlight cover. leave to dry. Buff off with clean cloth and presto! nice and shiny! My headlights on the front were all frosted/yellowish and my mate told me to try this and they came up excellent.

I will try that. Thanx.

I used colgate mint toothpaste... don't laugh it actually works! :D

Toothpaste is like one of the finest grit you can use... I copped so much flak for sitting on a stool brushing my headlights with an old toothbrush but hey if it works then why not :)

I used colgate mint toothpaste... don't laugh it actually works! :D

Toothpaste is like one of the finest grit you can use... I copped so much flak for sitting on a stool brushing my headlights with an old toothbrush but hey if it works then why not :)

I tried that before....it did help a bit....but still not good enough

I used cut n polish on mine and they came up alright. Then someone backed into the left headlight and need to get it replaced. The new one made the old one look crap so I sent the old one to Melbourne Headlight Exchange and they buffed both sides of the lense. Looks much better than anything I couldve done myself. $45 and a few hours is all they need.

i asked the same question a while ago and sum1 on here told me about a place in dandy.. i think it was called something along the lines of "melbourne headlight exchange" its off chelt road somewhere.. you take the headlights out and give it to them.. they pull them apart and clean them to brand new conditions and give them back.. from memory it was about $55 a headlight and took half a day...

One thing I found, you can polish/buff them and they come up great but don't last long (the yellowness comes back within a week or two).

Best thing I've found to keep them looking good is Plexus (thanks Meshmesh!), use this after buffing and it keeps them looking great.

  • 6 months later...
I used cut n polish on mine and they came up alright. Then someone backed into the left headlight and need to get it replaced. The new one made the old one look crap so I sent the old one to Melbourne Headlight Exchange and they buffed both sides of the lense. Looks much better than anything I couldve done myself. $45 and a few hours is all they need.

This method does initially work but after a few months it returns back to its horrible yellow tint.

Does anyone know where (or if) you can get a new lens?

I know the whole assembly cost $500 ($538 to be precise) thats why I asked if you can get the lens only.

Scoring one from a half cut/wrecker is pointless unless you find a near new one... on a car thats 9-12 years old I guess you've got Buckley's.

Having then professionally cleaned is a waste of time and money IMHO as the results dont last. This is something I experienced.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...