Jump to content
SAU Community

Recommended Posts

hey guys,

just wondering if anyone has a hks sequential bov?

mine really flutters, alot and i pulled it apart. i think the spring is facing the wrong way. my standard bov pushes open (toward the exit) so the air can escape. the hks' spring pushes away from the exit and i dont see how it works like this.

is this right?

thanks!

Link to comment
https://www.sau.com.au/forums/topic/50349-hks-sequential-bov/
Share on other sites

Yeh thats how they work the valve goes in and not out.

Tighten it up by un-tightening the black screw head closes to the blow off valve as a lock then using a spanner or socket tighten the one furthest away, make sure it goes in and not out. the re tighten the other one back up to lock it.

This will make it hard to open the valve under boost pressure and it will make a psshhtt in stead of flutter.

i believe this topic has been covered before so feel free to search...

besides from memory doesnt the hks valve you are referring to have two valve thingis (a smaller one and a larger one that only opens under heavy boost). I also read somwhere that these do flutter under light load so it is normal.

sorry sky, i took a damn good look but mainly found people trying to sell them.

as far as i can tell there is only 1 outlet.

a spring up the top covered by a rubber seal, then at the side the inlet for the gas from the piping, then down below 1 piston covering the outlet (spring moves inwards)

ok i just tightened the top screw as much as possible and took it for a drive, the bov seems to be working much better than before (more of a refined flutter). even at high rpm it still flutters. sounds great but is this bad for the turbo? is a fluttering turbo bad like the flutter from the air hitting the turbo and comming out of the pod?

The air shouldnt be going back through the turbo if you have a bov, Inless you have the bov too tight or its blocked some how ? the the hole purpose of a bov is to stop the air going back through the turbo, which can cause lag between gear shifts.

So i'm not to sure whats happening here. Is the BOV making a high pitch noise after letting the throttle off at high rpm ?

HKS bov is a pull type not a push type. This way it can handle more boost and doesnt leek under highpressure vacumm like other BOV's

think i got that the right way around but ya know what i mean :cheers:

I have a Monza SSQ, (i know its cheap, but dont laugh, it came with my car :rant: ) anyhow... it has a very similar design... and i was having a look at it last night...

and when i cover the outlet of the bov with the palm of my hand it tries to suck my hand in, like i can feel it suck my hand...

Is this bad. is my bov leaking? i dont really see how it can affect much as i guess it would be different if it were to be blowing while i rev it... as then it would be leaking boost. but if its sucking. is that bad?

i have nfi :)

Cheers guys.

and when i cover the outlet of the bov with the palm of my hand it tries to suck my hand in, like i can feel it suck my hand...

Is this bad. is my bov leaking? i dont really see how it can affect much as i guess it would be different if it were to be blowing while i rev it... as then it would be leaking boost. but if its sucking. is that bad?

All this talk of sucking and blowing!

Gotta Go!

?????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wow ELVIS. You have an....interesting approach to conversation. Did you not notice that I wasn't talking to you?
    • Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
×
×
  • Create New...