Jump to content
SAU Community

Help !!! Stereo

TiNTiN

By TiNTiN,
in Car Audio & Electrical

 Share

Recommended Posts

GOR33 Mentor

GOR33

Posted
Posted

haha this i know:) 1st take out the bottom part of the back seat, unscrew the bolts and pull up the seat- bit treaky just take ya time. then look for the clips holding in the back upright part and pull it out. then you should be able to get to the parcle tray. i think the covers may just come off, but iff not then u may have to unscrew stuff, then the speakers in the pods should unscrew, but if you wana put in 6x9s then you will have to unscrew the whole pod, take out the tray and cut holes for the new speakers. i would use the parcel tray to mark out a new one on thicker mdf, as it will support the speakers better and give better base response!!!

try that and get bak to us:)

Link to comment
https://www.sau.com.au/forums/topic/51301-help-stereo/#findComment-1016332
Share on other sites
JAPCAB Proficient

JAPCAB

Posted
Posted

Installing 6x9's in the back parcel shelf will be a bitch; you will have to cut the metal to fit the speakers in, your better off just popping in some 6 inch splits. once u get the back seat out, there is little room to work on the parcel shelf because of the back windshield, and not much room again to get in from the boot.

Link to comment
https://www.sau.com.au/forums/topic/51301-help-stereo/#findComment-1019248
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

agreed! I have done those speakers in the rear of a 33. it involved a new parcel shelf AND

removing a FAIR BIT of metal to make them fit. put a decent set of 6.5"speakers in there and leave it.

to get the shelf out you need to remove the rear seat. the instructions above are correct.

with it out the shelf unclips and pulls forward. remove any restraint bolts that may be in the way.

any questions email me.

Link to comment
https://www.sau.com.au/forums/topic/51301-help-stereo/#findComment-1019377
Share on other sites
  • 2 weeks later...
someonestolecc Grand Master

someonestolecc

Posted
Posted

6x9's arent as good as 'normal' good speakers. But if you already have them take comfort in the fact they are good performers for their price.

Whatever you do don't cut metal. God it frightens me how many people butcher their cars. Fit it properly like Craved!!!

Metal cutting is illegal for a reason.. and more importantly because it compromises the structural integrity of the car. You get more flex, it rusts, looks ugly, could possibly end up cutting your head off in an accident, and practically invalidates Nissan's testing of it under pressure/load/crash situations.

Why would you take your car away from the blueprint for something worse?

Jeez.

rant>

Link to comment
https://www.sau.com.au/forums/topic/51301-help-stereo/#findComment-1038300
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...