Jump to content
SAU Community

Recommended Posts

This car is currently in Japan and should be ready to register Later this year. Selling to buy a house or a GTR (Not sure which one yet).

Year : 1997

5 speed Manual

Car Location : Brisbane - Not yet complied.

Mods:

HKS GT2835 Pro S turbo

Stainless steel Exhaust manifold

Aftermarket Exhaust (unknown specs or brand at this stage)

HKS front Mount Intercooler

HKS Air Filter

Trust coolant Surge Tank

Larger Aftermarket Radiator (unknown specs or brand at this stage)

Cusco Surge Tank

Greddy Intake Plenum

Infiniti Throttle Body

HKS Fcon V pro ECU (Map sensor Type)

Twin Plate Clutch

2 Way Mechanic LSD

Tein coil over suspension

17" Enkei wheels

Front Cusco Strut Brace

Garage Thrash Drivers Seat

MOMO Race Steering Wheel

Blitz 300kmh Speedo

Various Aftermarket HKS and Greddy Guages

EBC (unknown specs or brand at this stage)

+ various other parts.

As i have never seen the car i won't be able to answer all your questions about the car, but i try my best to find out.

I'm after around $32,000 for the car which would include all compliance and importing costs, but not registration as depends which state the buyer is from as to where it will be first registered.

Link to comment
https://www.sau.com.au/forums/topic/51594-modified-r33-series-2/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...