Jump to content
SAU Community

Just dyno'd with the new intercooler :D

wilch

By wilch,
in Engines & Forced Induction

 Share

Recommended Posts

wilch Grand Master

wilch

Posted
Posted

First up Unique Autosports is cool. :P

Took the car to them today to do a dyno run, and encountered some problems (weird curve) and not much power gain. Anyway, out came the console (sp?) and timing gun, which revealed that the base timing was retarded,...so they advanced it. The car was then run up again, and there was a significant increase in the power throughout the rev range. Whoo! Cheers UAS!!

The last time the car was run on the UAS dyno it managed 166.9rwkw @10psi. Today it made 184.2rwkw @ 11psi with the new hybrid FMIC. (The red lines are from the last run, blue's new.)

I can definently feel it in the seat of the pants dyno too! Put it this way, I just got home 30mins ago from a quick drive and I'm still smiling.

There's some weird stuff going on high in the rev range still. A power FC will fix all that up, and should net me...ummm...lets hope for 200+rwkw. :)

(dyno sheets attached AFR, and PSI)

wil..

B-Man Grand Master

B-Man

Posted
Posted

Wilch - well done mate :P

Nice results.

UAS have a really great team and facilities :)

I was gonna come down to UAS today, but had to get a new turbo water hose

Once again - good effort and well done to UAS.

Go Adam and Ben :)

wilch Grand Master

wilch

Posted
  • Author
Posted

There's no torque line there at all dude.

The first graph shows AFR's, the second graph shows PSI. Have a look again.

The blue lines are the new ones (w/ intercooler), the red lines are the old ones (from the run without the intercooler).

wil..

wilch Grand Master

wilch

Posted
  • Author
Posted
Wil - have you got SAFC or anything ? Or are you just using standard ECU ??

 

PFC will make a big difference :P

Heya B-man,

Nup no SAFC. Just the stock ECU, full exhaust (except w/ stock cat), pod in cold air box w/ cold air feed, and the profec b2.

I will eventually get a PFC. I just need to wait for next months pay packet. So within 2 months and I'll be cheering even more so :)

wil..

krzysiu Grand Master

krzysiu

Posted
Posted
I had my car dyno at unigroup. I got pretty much the same results as yours but i got a bigger dip at top.

Had Hybrid front mount running 12psi with avcr, exhaust and pod filter

Dam thats a huge Dip, u gotta feel that lol

1 thing i dont understand why my line is a curve when i dont even have a boost controller, just running a cheap Bleed Valve. Would expect the boost controller to atleast not have any Dips in it.

wilch Grand Master

wilch

Posted
  • Author
Posted

The dips in my power line are due to the stock ECU going, "Hmmm, there's a lot more air than normal, oh s#!t, time to retard the timing...wait...things are ok, advance the timing...oh s#!t, retard again....etc etc etc"

I'm guessing you're either running an after market computer, or piggy backs. You'd never make 249rwkw with the stock computer, nor would the power line be a nice curve. I'm assuming your turbo is high flowed too, or you have some schmick bigger turbo in there.

hehehe...cause if you don't, i wanna run my car on the dyno you ran yours on! LOL :P

wil..

wilch Grand Master

wilch

Posted
  • Author
Posted

Hard to tell....... Do a dyno run where they chart your psi.

I know of another that runs a bleed valve, and the boost runs up smoothly, then falls off significantly higher in the rev range (ie. doesn't peak, and hold... the ebc's tend to peak and hold if set properly, or like mine, spike right at the start then hold. LOL).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...