Jump to content
SAU Community

Recommended Posts

Engine mount on the left side broke but lucky i had the r34 strutt so that gave the engine bay extra strengh otherwise the impact would have damage the engine.

About the compliance plate, i'll need to call up Canberra see if am i in anykind of trouble if i give it away with the wreck.

Forgot to add i have exceedy button clutch in the box as well so there go here is another bonus.

I really want to take it to ice to have it strip down and make more $$$ but it seem like ice is just too busy so any inspec wont' be at ice until NIGEL is ready. Well it doesn't look like it will make it to ICE as i HAVE a few GENUINE offers.

Test drive an EVO1 today and the power out put is not even near my cars' out put, i really like to see it on a silvia and see what it does.

How much for the fuel pump?

Sorry don't know yet, it could be an after market item as it make noise as hell or could be faulty :P .

Anyway to everyone else......Shane, Ash, Scotty.......car will be tow to ICE this friday arvo cos' last deal didn't fall through due to financial problem.

:headshot:

Strip it yourself, why do you need a workshop to do it.

Is the gearbox for sale or is it part of then engine package or are you still looking at the whole car only?

Strip it yourself, why do you need a workshop to do it.

Is the gearbox for sale or is it part of then engine package or are you still looking at the whole car only?

Well once it's at Ice which this friday, first in best dress. strip it myself? guess i could but i don't have space as i'm boarding off ppl and i just don't have the time .

A guy just call me up from Sydney reckon dealer charge him $7k just for a haft cut alone and my come with ----> refer to pic so $6k still a bloody good bargin.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...