Jump to content
SAU Community

Recommended Posts

I don't know either.

but my experience has been that as long as it is never registered, no-one tracks the car once it arrives.

but again, if you want something for parts surely a half cut is better, cheaper to buy and import and will probably have all the bits you need.

ok, i think its a 1995 rx7, you can only import them for race/rally use...

now, u can import one for about $13000 or cheaper

and in australia they are $30-50000

so if you have lets say a bare shell thats road legal in australia, would taking out the whole of the import and putting it into the aussie car make it legal?

yea i been dreaming about importing series 6-7 exracer rx7. i think you need a ANDRA licences but you could drive it on the road, (in wa) anyway with $12 permit's they only last 48hours so just pick one up every friday arvo and kill everyone on crusies on the weekends. also dont need to have number plates. prob wouldnt happen but its my dream.

so you can do that?

you can buy a race / rally use import, and swap everything into an australian road registered car and itll be legal?

thanks

No you cant do it as the motor is never to be in any other vehicle.

RX7's arent on the FIA list so you have to get a letter from CAMS to bring one in as of the last month.

They are cracking down big time.

nope, the car was under the old LEV scheme and the engine from a half cut...but of course the people who inspected for the blue slip didn't know where the engine came from.

My rally gtr on the other hand has been sitting around with a blown engine for about 6 months and is about to get a new one, but then that engine will be rebuilt and used elsewhere....I'm pretty sure there is no rule about how a part (eg engine) can be used once it has arrived in aus.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...