Jump to content
SAU Community

Recommended Posts

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

I currently have 4 guys with Buddy Club suspension in their Skylines that I am supplying softer spring rates to in an attempt to get them some ride comfort.

:nyaanyaa: cheers :happy:

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

The Group Buy thread is the best place to start

http://www.skylinesaustralia.com/forums/in...showtopic=85592

Then PM me if you have any questions.

:O cheers :woot:

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

PM sent

:O cheers :woot:

I might be picking up a gtr rear cradle, susp, brakes, all of the above, really cheap too... I'll let you know how it goes...

what do i need to know in order to convert it...I have a bunch of mechanic mates up here with all the tools and probably all the knowledge i need, but i would love to discuss it with someone first. Take full advantage of the SAU collective wisdom.

I assume i will need:

mod certs afterwards

GTR rear end without HICAS for donor parts (which models are these - i assume it's the 34 only)

will the GTR rear driveshaft fit? or should i use the Stagea one?

I will PM Cruiseliner and SK

Edited by captinsane
  • 5 weeks later...
  • 4 weeks later...

a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

  • 4 weeks later...
a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

i know that it sounds like i dont know what i am talking about but did have tein tops but did with the 3rd stagea run in perth i fractured one badly r33 strut tops all good all installed back on track looking forward to next meeting !

  • 1 month later...

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

New standard Skyline shocks cost more than Bilsteins last time I checked. The standard shocks won't have the valving to control lowered springs (check out this thread http://www.skylinesaustralia.com/forums/in...=103158&hl) plus they will wear out pretty fast. Which is probably why your current (standard) shocks are stuffed.

;) cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...