Jump to content
SAU Community

Recommended Posts

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

any body have or know about Buddy club suspension for the stageas ? please let me know if its worth the $2034.50 they quote dilivered to your door.

http://www.nengun.com/buddy-club/club-racing-spec-damper

how low will it go? how hard would the ride be will it fit the s1? what is included in this kit? and most of all how good is the handling.

cheers

I currently have 4 guys with Buddy Club suspension in their Skylines that I am supplying softer spring rates to in an attempt to get them some ride comfort.

:nyaanyaa: cheers :happy:

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

ok scrap that idea then can you put a quote together for me for every thing ill need to get better suspension for my S1 stag - the springs

figure i can just use my old ones (probly not the best but will cut cost a bit)

The Group Buy thread is the best place to start

http://www.skylinesaustralia.com/forums/in...showtopic=85592

Then PM me if you have any questions.

:O cheers :woot:

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

that thread is for people with half a clue about suspension.... sif i know what i need ? so for my question, what do i need with out the springs? and how much for every thing you're about to tell me i need

PM sent

:O cheers :woot:

I might be picking up a gtr rear cradle, susp, brakes, all of the above, really cheap too... I'll let you know how it goes...

what do i need to know in order to convert it...I have a bunch of mechanic mates up here with all the tools and probably all the knowledge i need, but i would love to discuss it with someone first. Take full advantage of the SAU collective wisdom.

I assume i will need:

mod certs afterwards

GTR rear end without HICAS for donor parts (which models are these - i assume it's the 34 only)

will the GTR rear driveshaft fit? or should i use the Stagea one?

I will PM Cruiseliner and SK

Edited by captinsane
  • 5 weeks later...
  • 4 weeks later...

a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

  • 4 weeks later...
a crossreference list ive made up for all the suspension components on the stagea

info sourced from FAST, cusco, JIC websites

Front Sway bar

R33 GTR

Rear Sway bar

S14

Front camber arms

GTR33

wgnc34

Rear camber arms

S14

r33

rear toe arms

s14

r33

rear traction /tension arms

s13

s14

s14

y32

y33

v35

all 32 /33/34s

a31

z33

c33/34/35

front tension rods

BNR32

BNR33

toe rods front

a31 cefiro

HC33

M35

i think that covers all of them....

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

front struts for s2 r33 r34 pedders xtreme full adjustable ride hight if you have tein's such as i did you need hq - wb rear spring dampers up top to complete this conversion with standard tops not a prob !

i know that it sounds like i dont know what i am talking about but did have tein tops but did with the 3rd stagea run in perth i fractured one badly r33 strut tops all good all installed back on track looking forward to next meeting !

  • 1 month later...

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

Has anyone here just replaced thier stock factory shocks with another set of standard ones. Although I would love to buy SK's whiteline/bilstien setup in the group buy I have just spent so much money on the car this year so far that I just can't justify anymore at the moment. Most of the bushes have already been replaced with whiteline ones anyway (by the previous owner) and with the new nismo kit bringing the car down lower anyway I don't have any intention on lowering it at the moment anyway. So I just want to replace the clapped out stock shocks with another set of stock ones. Basically just after prices and opinions from anyone thats done it. Recomended brands etc.....

New standard Skyline shocks cost more than Bilsteins last time I checked. The standard shocks won't have the valving to control lowered springs (check out this thread http://www.skylinesaustralia.com/forums/in...=103158&hl) plus they will wear out pretty fast. Which is probably why your current (standard) shocks are stuffed.

;) cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...