Jump to content
SAU Community

Recommended Posts

Has anyone here dealt with a company in Sydney called “TOO FAST 2 FURIOUS Performance”? They are based in Sydney and apparently they are the cheapest distributor of brand new turbos and performance parts in Australia.

The are advertising a Hybrid T3/T4 turbo for $800 and stuff like T70 650hp turbos for $1000. I am looking at buying quite a bit of performance gear from them; does anyone know how legit they are?

Link to comment
https://www.sau.com.au/forums/topic/53228-too-fast-2-furious-performance/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Has anyone here dealt with a company in Sydney called “TOO FAST 2 FURIOUS Performance”? They are based in Sydney and apparently they are the cheapest distributor of brand new turbos and performance parts in Australia.

The are advertising a Hybrid T3/T4 turbo for $800 and stuff like T70 650hp turbos for $1000. I am looking at buying quite a bit of performance gear from them; does anyone know how legit they are?

Havn't heard about these guys, but what's the web address, throw that up on this post!

Would have included it had here been one to give :P

There advert in the HPI mag includes and e-mail and phone number.

[email protected]

Phone: (02) 93491154

I e-mailed them, just got an auto responce because they are too busy. Rang a few times last week, nothing :( I will try again later this week.

"Monday, October 11, 2004

Dear Sir,

Thank you for your interest in our products

Due to large number of enquiries and Australian-wide orders, we apologize for the delay in replying to your email.

You can call me on 0416-143177

ALL products is brand new - comes with 12 months warranty. No one can compete with our price in Australia.

We would like you to know that your satisfaction is our goal. If you have any problems, or if there is anything we can help you with, please do not hesitate to drop an email to: [email protected]

Sincerely,

Toofast2furiousperformance"

NO web site!

Hybrid T3/T4 550hp Wet Floating Ball Bearing Turbo – Stage 3 for Skyline. Compressor Wheel .57T Housing .50 A/R. Turbine Housing .63 A/R.

I am not advertising there shit! I just want to know if anyone here has dealt with them before….

they sound like one guy pretending to be a business... ie Pacific Internet personal email address, and just watch out that the turbs aren't the same chinese made ones that people sell on ebay for stupid prices that stop working in stupidly short amounts of time.

Yep, if anyone saw the posts in the FI forum about the hybrid turbos I posted a few weeks ago it was from these guys.

It looks like they do post their stuff on EBay too- I can't find the link at the moment but I'll post it when I do.

I've been told that you'll need to modify the dump pipe slightly to bolt up to the turbo flanges.

I sent them an email regarding lag on a RB25 and this was their response:

"Our Stage 3 T3/T4 .50 .63 with our 40Mm racing W.G makes the turbo boost comes around 2700 - 3000 rpm mark.

This setup @ 12 psi gives 200Hp gain at the wheel on RB25DET - turbocharger is set for early boost."

The deal sounds OK, I've talked to them several times now - I'm just a bit skeptical about the lag claims at the moment..

Yeah at this stage I don’t really car if it comes on at 2700 RPM or 3700 RPM, just want to know if they are the real deal. Too many shit hi-flowed turbos never see over 10,000k’s and I wasted $2000 on one once after it was highly recommended to me through people I trusted. At this stage a new HKS 25/35 seems like the safest option at $2000!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...