Jump to content
SAU Community

Tomorrow Night: June 5th

Morgs

By Morgs,
in New South Wales

 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

Tune went very well. On Matt's advice I just went road tune. It was good, not a huge difference but there was already an aftermarket ecu in the car so I probably would have noticed more if going from stock to PFC.

I can't tell you what us boys talked about though...

Beer Baron Grand Master

Beer Baron

Posted
Posted

haha, no dyno figure yet.

EC, let's just say if you head out tonight you might see me there.

Matt had nothing bad to say about you, just that you are insane to drive a car with such an agressive twin plate every day. and respect to you for it, cause he stalled it 3 or 4 times getting it into the shop.

Moanie Grand Master

Moanie

Posted
Posted

how come no dyno figure?!?!

oh! ec tonight? :P my car isn't driveable though :cheers: that sux!!!! what times are you hoping to run?

hehehe... matts a classic!!! such a great guy! i need to get a touch up tune once i get my new clutch!!! haha.. he won't have to worry stalling it so much!! doubt i'll get another twin plate ;)

Beer Baron Grand Master

Beer Baron

Posted
Posted

wilch, pm sent with the real story...

well, I really want to get a figure on an AWD dyno instead of having to pull fuse etc to go into 2WD. Sometimes there can be problems with getting GTRs to run in 2wd. Other than that just didn't really see the need at this point. I didn't want to push it on the dyno with the Kakimoto ecu, so I wouldn't have been able to get a before and after comparison which is what I would want anyway.

Yeah, I have a twin plate in the GTR and it's no walk in the park :P

Moanie Grand Master

Moanie

Posted
Posted

what are you boys talking about?!?!?!?! *suspicious look*

ahh yeah.. i forgot matt only has the rwd dyno... he said he will be getting an awd one soon!! i doubt that day is too far away ;)

and yeah.. the twin plate..i honestly love it! its all my traffic driving that killed it :P i don't know how i'll adjust back to a normal clutch! i just love being able to launch and not worry about breaking anything!! dont know what single plate to get that would give me the same assurance :cheers: any suggestions?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...