Jump to content
SAU Community

Recommended Posts

Hey guys,

I got my car dynoed on friday and got 176.8kW on a DD in shootout mode.

Personally, I think that's pretty good considering my car is dead stock except for exhaust although I know dyno readings can be misleading.

Anyway, I just wanted to compare with others out there with a similarly stock car.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/53774-got-my-r33-dynoed-comparisons/
Share on other sites

Hmm it does seem high, but it was in shootout mode, and on a fairly warm day.

The reason I don't doubt the integrity is because it was done purely for diagnosis of a problem rather than the installation of any performance bits so theres no reason for them make it read higher.

The other thing could be unknown mods to my car, but it looks stock as in the engine bay and interior...

That is a little high for just an exhaust.

I just got my dead stock 4door r33 tested on the dyno and it produced 135kw at the treads (which is normal 4 an r33 gtst)

If you don't see any mods in your engine bay it could be possible you have a retuned ecu such as.. Mines etc.

wow... those figures seem too good for those mods. would you know if other cars on that dyno also getting high results??

Well it was at TM autosports at Tuggerah which has done dynos of FLYBYE and also that orange autostyle 200ZR (i think it was that one, with 441rwkw). Also, my brothers car ran about the same as me and he has a worked 308...

Well I have just dynoed my R32 GTR on a DD Dyno and got 188kw @ wheels at 14psi 6000rpm. [/u] Mods for power include: Steel turbine and larger comp wheel (mild upgade) on GTR turboes, Tomei cams 260/260 and a trust intercooler. Forget all the support systems for now blah blah blah :P

I was in shootout 6 mode with atmo compensation "on" and correctly setup (thank you dick smith weather station)

At this level of mods my air flow meters are reading 5.1V at 6000rpm and I have major boost creep due to the turbine side and/or waste gate being to small. Boost although set at 14psi creeps up to 18psi by 6000rpm so I don't rev it any further than that.

I continually find it amazing, as I was the dyno operator on my own car, how people seem to get 200+ kw on near standard turboes and seem to suffer non of the above problems?>? The engine is in good condition with no air leaks and has good support systems in place.

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...