Jump to content
SAU Community

HICAS Lock - Side Effects?

BoOsTeD_RB26
 Share

Recommended Posts

BoOsTeD_RB26 Experienced

BoOsTeD_RB26

Posted
Posted

Hi all,

I'm very keen on fitting a HICAS lock kit to my car, and to be blunt, HICAS is giving me the shits. I have been told not to spend money on trying to fix HICAS as such, and instead, just fit the lock kit.

I have heard good stories about these lock kits, however are there any side effects? I ask this because there seems to be a little bit of confusion in regards to this.

I have heard the following:

- Steering becomes heavy.

- HICAS light is on constantly and needs the dash to be removed to remove the light.

Can anyone shed some light?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/54134-hicas-lock-side-effects/
Share on other sites
Gav Mentor

Gav

Posted
Posted

On my R32 GTR, the positives of fitting definately outweighed the negatives.

Positives:

* much more predictable on the track, particularly when powering out of a corner and the back steps out slightly. Previously the HICAS would try and second guess what is happening, which is compounded by the ATTESSA splitting torque.

* saved a significant amount of weight not just in the rear rack/solenoids, but in the engine bay as well.

* picked up some worn components on the tie rods at the time. This really "tightened" up the feel of the rear end.

* didn't have any probs with the light showing on the dash - mayby because this is the R32 hydraulic version?

Negatives:

* steering is slightly heavier at low speeds

* turning circle definately increases without HICAS

Cheers

Gav

armbrusb Proficient

armbrusb

Posted
Posted

I would like to say goodbye to my hicas. I have noticed the 'kit' (pipe with two bolts welded to the end) cost $350 (from UAS). I was thinking on making my own - but would prefer to buy one cheaply.

Is anyone making them - how much should I pay - since I have found UAS to be kinda expensive?

T0nyGTSt Grand Master

T0nyGTSt

Posted
Posted
I would like to say goodbye to my hicas. I have noticed the 'kit' (pipe with two bolts welded to the end) cost $350 (from UAS). I was thinking on making my own - but would prefer to buy one cheaply.

Is anyone making them - how much should I pay - since I have found UAS to be kinda expensive?

http://www.skylinesaustralia.com/forums/sh...ead.php?t=46581

Skylinegeoff is your man.

$110 - doesn't get cheaper unless you wanna make it yourself.

T.

2BNVS Veteran

2BNVS

Posted
Posted

or if u buy from nengun which are around the 150 mark, just a question on removing the hicas on an r33 gts-t altogether as in not only the lock kit, but removing the whole system, how much of a job is it to get done, and roughly how much weight will this save?

cheers...ben.

Greg Veteran

Greg

Posted
Posted

hey ben,

it's pretty easy mate :P took me about 40 min, and that included doing a wheel alignment afterwards!

saves about 4 kg from memory, i posted it somewhere.

my steering is heavier at low speeds though. you can snip a wire to disable the light.

Cheers

Greg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTST Sh*tbox to Polished T*rd

      By Duncan · Posted

      Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • pacman_1219
      RB25DET Neo Rebuild

      By pacman_1219 · Posted

      Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...