Jump to content
SAU Community

RTA Romours

bangahh

By bangahh,
in General Automotive Discussion

 Share

Recommended Posts

MerlinTheHapyPig Mentor

MerlinTheHapyPig

Posted
Posted

using the average speed, going down a hill at 125 for half a minute isn't gonna bump your average speed over 110 over a decent distance/time period. - so in this case, the system is fairer than standard speed cameras/laser.

Why doesn't everyone just drive at (or below) the posted speed limit? It's not very hard to drive on the speed limit without cruise control and also keep an eye on the road, im sick of people who use that excuse. - I use cruise control most of the time on hwy driving, but sometimes i don't and never have any trouble keeping it on 100/110 - if i go down a hill and speed up, i brake / change gears.

If you speed on purpose, you should accept the consequences of breaking the law - and dont whinge about it

Stricter speed enforcement may or may not reduce the road toll, but that's another debate

Revhead Grand Master

Revhead

Posted
Posted

I'm sick of the goodie two shoes people that crap on about 'if you speed, accept the consequences'. The fact is that the vast majority of people who are caught speeding are only just over the limit, and are arguably no more dangerous than someone who is going at or below the limit. People are being punished for the sake of it, and the motivation is not safety, it's cash. It's like being booked for touching the centre line as you make a turn onto an empty street for breaking a double white line - technically you did break the law, but the enforcement is completely inappropriate. Speed limits were brought in originally to stop people doing ridiculous speeds in inappropriate places; now they're a hard-and-fast number that, if broken, means instant death and huge penalties. They've become an easily quantifiable cash cow for governments, and motorists in general are an easy target.

If I'm booked at 200km/h in a 60 zone, then I'd accept the consequences of my actions. If I'm booked for 110 in a deserted four-lane 100 zone, I'm going to whinge, because the law is being deliberately interpreted to maximise fiancial gain.

Bax Rising Star

Bax

Posted
Posted

Agreed, if we speed and get caught its noones fault but our own.

But there used to be places where it would be a quiet stretch of road where you could ease on the throttle a bit and coast at a nice speed to make up a touch of time. Nowadays the only places you can speed without running the risk of a speed camera, is local streets.. And hopefully noone is too keen on doing that.

Theres no doubt in my mind that its about the revenue, yes speed kills, but 13km over on a quiet safe road doesn't.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • LegendGTR
      EFR7670 exhaust selection RB26

      By LegendGTR · Posted

      I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • PranK
      Stock Airbox and Snorkle for RWC - VIC west

      By PranK · Posted

      Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • PranK
      Duncan's V37.......race car?

      By PranK · Posted

      This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...