Jump to content
SAU Community

Recommended Posts

It's quite possible that the 'custom' plenum is just a step backwards from the stock one. Is it just the plenum, or a whole new intake manifold (inc. runners)?

I've seen some pretty poor looking custom plenums on RB25s and I'm sure some of them would have been a step backwards from the stock one.

Richard

It's quite possible that the 'custom' plenum is just a step backwards from the stock one. Is it just the plenum, or a whole new intake manifold (inc. runners)?

I've seen some pretty poor looking custom plenums on RB25s and I'm sure some of them would have been a step backwards from the stock one.

Richard

Its the whole nine yards, and fundementally looks fantastic, a pic is attached of it

Just not sure if the exahust cam timing adjustment is holding the whole thing back or not, or what exactly is casuing the problem

yeah, he has already been contacted etc

I am sure I read somewhere about someone putting on a Greddy and a custom plenum and having to drop back the amount of advance/retard on there adjustable cam gears

Just trying to find out who it was.........

Chris

Its the whole nine yards, and fundementally looks fantastic, a pic is attached of it

Just not sure if the exahust cam timing adjustment is holding the whole thing back or not, or what exactly is casuing the problem

Yeah, I agree that plenum looks nice. I think a little research is in order to find out why you guys went backwards with it.

Richard

G'day all,

posting as a question for a mate who is having a few probs -

Custom plenum installed and the car has gone backwards in power quite a bit, I read somewhere the other day (cant remember where, I read so much) that guys who have put Greddy/custom plenums and who have had adjustable cam wheels had to adjust these to suit the new plenum and airflow charactersitcs

ie they have been set up with tha standard plenum etc, and have had to be changed quite considerably to get a good result

Currently the exahust cam wheel is retarded 4 degree's (from memory) - engine is a RB25, which was making around 270rwkw on the stock plenum

Can anyone help or suggest what the problem may be  

Chris

I used to race karts. Way back when I had a fairly fast DAP T75.... Anyhow one night it was going stong (as they do when lean) and it put the rod through the bottom of the crank cases.

A guy came to me in the pits and offered the price of a new engine for the barrell and head.

We did the deal and by Wednesday he was on the phone "I just measured this barrell and it is Stock!!!"

"I know mate,"I replied" dont, stuff with it. The next meeting I blew him off down the shute.... "WTF I said??... "Oh I just fixed up the ports he said....

Lesson for me... Unless you have gut loads of cash to spend on R & D, leave it alone...

Who believes beer made in a garbage can is as good as the brewery makes??? When you pay for the the name you pay for the research....

Anyhow, I'm sure after countless hours (what cost) you cobber will get it to be something OK... How much are those trick Jap items again??

Hope it improves without being a WAFTAM Chris,

Good Luck

TT :/

If I remember rightly it has RAM TUBES.:/

The plenum has a ramming problem then.Could be overcome with a ported head,cams & match ported manifolds to realy get things flowing?Or do you think that i have just gone too far and left the saine answer. :cooldance

The plenum has a ramming problem then.Could be overcome with a ported head,cams & match ported manifolds to realy get things flowing?Or do you think that i have just gone too far and left the saine answer. :cooldance

Ahhh no, the problem is distribution, not all cyinders get the same airflow at all rpms. A cam upgrade works the same on all cylinders, so it doesn't fix the distribution. Ditto porting, matching etc.

So there are 2 ways to overcome uneven distribution, the first is to design the plenum to even out the airflow. Not easy, aerodynamics is a very tricky science, Nissan spent millions to get the standard plenums right. The second is to compensate for the different airflow by programming the ECU to supply different amounts of fuel to each cylinder. This keeps the A/F ratios in the safe zone and makes more power as you don't have to run one cylinder rich in order to overcome the one or two lean cylinders.

Hope that helps:cheers:

And you don't expect anything sensible @ 11pm on Friday Night...

The guys that design these items for OEM do have a fair idea. While I concure with skids diagnosis, it is like grinding a cam to suit your inefficient plennum. Sounds like a WOFTAM to me... Imagine setting up A/F readings on all six cylinders... I have enough drama getting the one average right. Also imagine the turbulance the inrush of air has to go through by passing up to five velocity stacks (if that is what is being used).

Anyhow each to their own, I get "I told you so's from my tuner and crew cheif all the time.

TT

So the A/F ratios are hard to keep at a constant at any given rpm....So when a car is tuned with aftermarket ecu they really only try to make an A/F average accross the entire rpm range as good as they possibly can.So in cases like this it is not the tuners fault that it is not making the power it's the plenum design......

Maybee a fatter mid section in the plenum to give it time for the A/F ratios to even themselves out and a splitfire coil pack to burn the extra air and fuel quicker making its way into the cylinders...

Im not at all knowledgeable about this process so go easy....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...