Jump to content
SAU Community

Recommended Posts

I have just had a set of HKS Step 1 Cams installed in my 94 Series 1 GTS-t. The exhaust cam is 264* P/N 2202-RN175. The problem is the CAS will not mate up to the HKS camshaft, with has a totally different arrangement to the stock camshaft. Has anyone experiecnced this problem and is there a HKS part that can replace the part that is riveted onto the CAS that engages in the camshaft?

Thanks in advance

Ian

Link to comment
https://www.sau.com.au/forums/topic/54375-hks-camshaft-problem/
Share on other sites

so you have it sorted now?

Nooo...not yet dnb...far from it....I am going to try and locate a R34 CAS and that should solve the problem, but apparantly R34 CAS's are hard to locate. Didnt really need all this drama..If the right cams had have been sent to me from Japan, this should never have happened.

Thanks dnb

Ian

yeah thats crap. have you installed them yet? maybe you can get them to send the proper ones? or a cas if youve installed them

Yes the cams are installed along with new timing belt and tensioners, water pump, seals. Dont want to take them out and send them back to Japan..I'll have to find a way of getting the CAS to work.

Thats kinna odd isnt it? why would you have a star drive CAS? I thought all the non-neo RB25 had half circle drive?

I have a HKS 256 exhaust cam P/N 2202-RN171 and it has a half circle drive and my CAS is also half circle drive. So doesnt this mean you need to look for R33 CAS?

btw, Im also looking for a CAS as mine is stuffed :(

Thats kinna odd isnt it? why would you have a star drive CAS? I thought all the non-neo RB25 had half circle drive?

I have a HKS 256 exhaust cam P/N 2202-RN171 and it has a half circle drive and my CAS is also half circle drive. So doesnt this mean you need to look for R33 CAS?

btw, Im also looking for a CAS as mine is stuffed  :(

I think its the opposite to what your saying lukits, the Series 1 and Early Series 2 have the star drive and the Late Series 2 and Neo R34 have the half circle drive in the CAS connection.

I have a Star Drive CAS working perfect for sale now. You can have it for $200 + postage.

Thanks lukits

Ian

ph.0414780869

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...