Jump to content
SAU Community

Recommended Posts

Going back on the dyno after my 210rwkw read out on 8psi 2 weeks ago...

Could only run 8psi because the wastegate actuator was only holding 8psi.. now i fitted a aftermarket 14psi one and raised the fuel pressure up a bit...

Specs

RB30DET 25/30 Hybrid with all Stock 25det injectors / setup

Stock Internals

AVO Stage 2 cooler

3"

PFC

Malpassi

rx7 / t4 hybrid turbo

Im thinking the turbo has lots of room for more power if it made that reading at only 8psi ???

If it ran 210rwkw before on 8psi wonder what it could make now :mad:

Anyone have a similar setup with power figures?? will post a before and after dyno read outs

Link to comment
https://www.sau.com.au/forums/topic/54802-rb30det-going-back-on-the-dyno/
Share on other sites

yeah u should be able to get that

stock inj have been used up towards 300rwkw reliably

you cant be serious about this ?

Stock 370cc injectors to make 300rwkw ??? how is that possible???

Sure 300rwkw could be done but the injectors will fail at some time breaking your motor.

Why do you think there are so many rb25's that run stock injectors and break once over the 240-250rwkw mark.

Look at the reliable RB25's that have held together.

Freebaggins 280rwkw is an excellent example running bigger injectors.

Guilt-Toy,

Do you have a boost leak? or is your Bov Venting?

Have a listen and watch the boost graph while on the dyno.

No boost leak or anything... it must be a waste gate controll issue... running a bleed valve.

You are right. In the morning i am going to put the boost down to 8psi and save up some more pennies for injectors...

Would GTR injectors be good enuf ?

Bleed valves are known to bleed down at high rpm.

Generally they will only hold ~2-3psi more than the wastegate can handle.

Either redrill the holes in your actuator bracket and make it an adjustable actuator :D or get your self an EBC.

I went with the redrilling of the actuator bracket.. Works well, takes a little fiddling though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...