Jump to content
SAU Community

Recommended Posts

Japanese road laws have changed effective today (November 1st 2004)

From today, anyone seen driving while holding a cellphone can be stopped and issued with a 50,000yen fine and one demerit point.

The old laws banned ketai useage while driving . . . . . . . but the officer involved would have to show that using the ketai was impairing your driving. Hence the reeason no one was EVER pulled over for this, and everyone just ignored the law.

The same changes to the law also apply to bicycle and motorcycle riders. So be careful everyone.

IG

Link to comment
https://www.sau.com.au/forums/topic/54972-japanese-road-law-changes/
Share on other sites

If you can get hold of a copy of the Japan Times from last Friday, there is a big write up of the changes in there on Pg 10.

Most of the other changes were aimed at Bosozoku. Eg

Removed or poorly fitted exhaust = 50,000 yen.

Noisy driving (such as gunning the engine) = 50,000

Refusing a breathalyzer test = 300,000

Mob riding = Instant arrest (once they catch them)

Also, all the new bank notes are being released today.

http://202.221.217.59/print/business/nb06-...b20040616a3.htm

Similar to the ones here in Aus (or Qld at least, dunno about everywhere else). The only difference is that ours is a 3 point loss and $135 fine... Y50,000 seems pretty steep!

How do you use a mobile phone on a motorbike? It's a bit hard to hear through the helmet :D

i read this earlier in the year, a few things have changed...but the most important one you should note is 60,000yen to 300,000yen fine for drink driving!

Not quite correct. That particular fine comes into play if you try and evade a breath test.

Under the old laws, it was cheaper to try and speed off, or refuse to take the test, if you saw the police breath testing on the road ahead. The new laws just correct that.

With regard to the new cellphone laws. I was slightly off.

The police can issue instant fines of 7,000 yen if they catch you talking on a ketai while driving. However, if you refuse to pay the fine, the courts can increase that to 50,000 yen.

Sorry for the misinformation. The Japan Times article wasn't particularly clear.

IG

huh...evade and when they catch you, you could be up deportation my friend...not just 300,000yen and a suspended license.

Under the old law i.e. the old smell test, they would let you go as long as they judged you still competent to drive...which was not accurate.

Furthermore under the old law they were basically not catching anyone as such!

Sure the fine for using a keitai is 7,000 yen? My wife seemed to think it was only 5,000?

Japan Today is saying that:

Small motorcycles = 5,000

Cars and Large Motorcycles = 6,000

Trucks and Busses = 7,000

http://www.japantoday.com/e/?content=news&...&cat=&id=317518

Either way, It's going to get expensive really quickly if people continue to do it.

IG

dave read this  

http://mdn.mainichi.co.jp/news/20041101p2a...0dm006000c.html

funny thing is they will do this to show they are enforcing the new law but after a month or so they won't care plus 7000yen ain't that much but no doubt it will go up.

Nailed it in one Evo_Lee. Give it a month and they'll be back to normal (ie doing nothing) and people will just start using their ketai in their cars again.

Pathetic isn't it.

IG

well, I have to admit the new fines don't really bother me...I'm a good boy me :innocent:

I never talk on the phone while driving. :(

Certainly don't drink and drive. :alcoholic

And my cars are 100% legal...and when I want to have some "fun" I pick the time and the place with care :angel:

:(:D :D

Drive smart people and pay less tax :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...