Jump to content
SAU Community

Recommended Posts

Hey Guys, I'm going to do a test tonight with my Carbon Canister. I'm going to by pass it and vent the spent gasses straight to the atmo and see what kind of Power increase (if any) and what kind of loss of fuel economy I get. Just wandering if anyone has already removed/by-passed the canister and what kind of performance results they got? Thanks in advance.

Ben, I've just found it floating around in a few performance articles - remove the Carbon Canister, make a few kw's and gain some room inthe engine bay.

And hell, I love the smell of fuel vapour :P

Strutto, like any of us would ever do anything "illegal" to our cars. Almost as preposterous as any of speeding. Geez.

More importantly, it's only illegal if you get caught.

well doesnt the canister attach to the plenum at some point?

u may gain a little response or something from having less pressure leaks from the plenum, other than that, i cant see any performance benefit?

Be sure to post the results though,

you will find you wont get any performance increase from blocking the charcoal canister, it works by storing fuel vapours from your fuel tank and purges them into the intake manifold during light throtle or cruising operations. it is also the breather for your fuel tank so its not the best idea to go blocking off all the hoses. it is a great system and it works very well so why dick with it

Why dick with it.....try removing your braking system, this only increases the rolling resistance of the vehicle...it should make you go faster though. Or you can remove the front and rear windshields to let the air pass straight through rather than around. That might work. What if you remove all the panels, seats, dash and carpets to light weight it...hmmm that's an idea. OR HOW ABOUT YOU JUST BOLT A FRIGGIN BIG TURBO ON IT AND STOP ***** FOOTING AROUND WITH LITTLE CRAP THAT WON'T MAKE A DIFFERENCE AND PROBABLY JUST GIVE SOME DUMB COP ANOTHER REASON TO TAKE THE CAR OFF YA.

Sorry, I got a little outta control there, right at the end bit.

Why dick with it.....try removing your braking system, this only increases the rolling resistance of the vehicle...it should make you go faster though. Or you can remove the front and rear windshields to let the air pass straight through rather than around. That might work. What if you remove all the panels, seats, dash and carpets to light weight it...hmmm that's an idea. OR HOW ABOUT YOU JUST BOLT A FRIGGIN BIG TURBO ON IT AND STOP ***** FOOTING AROUND WITH LITTLE CRAP THAT WON'T MAKE A DIFFERENCE AND PROBABLY JUST GIVE SOME DUMB COP ANOTHER REASON TO TAKE THE CAR OFF YA.

Sorry, I got a little outta control there, right at the end bit.

lol settle down, he was just posting to find out if it was possible to gain any more power, we're always looking for new ways to gain that little bit extra

I dont think you'll actually gain any power. But if you decide to remove it, its probably a better idea to block off the line coming from the fuel tank which not only stinks and is a hazard, but also is a waste of fuel. Dont worry about the tank not being ventilated as the fuel cap is designed to let air in or out of the tank as needed.

lol settle down, he was just posting to find out if it was possible to gain any more power, we're always looking for new ways to gain that little bit extra

How you enjoy the smell of petrol vapour when sitting at the traffic lights on idle.

Hope you dont smoke in the car :rofl:

How you enjoy the smell of petrol vapour when sitting at the traffic lights on idle.

Hope you dont smoke in the car :rofl:

i dont smoke at all :rofl:

and i didnt say i was doing anything, im here to watch :thankyou:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...